EasyManua.ls Logo

Branson 2400 User Manual

Branson 2400
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Service Manual
(00 series - Chassis)
KUKJE MACHINERY CO., LTD

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Branson 2400 and is the answer not in the manual?

Branson 2400 Specifications

General IconGeneral
Engine Power24 hp
PTO Speed540 rpm
Lift Capacity1, 323 lbs
TypeTractor
Drive4WD
Engine TypeDiesel
Hydraulic Remotes1
Fuel Tank Capacity6.6 gal

Summary

Location of Safety Decals

Safety Decal Identification and Placement

Visual guide to the placement and identification of safety decals on the tractor.

Periodic Maintenance Schedule

Maintenance Schedule by Running Hours

Schedule of maintenance checks and replacements based on running hours.

Fluids and Lubricants Chart

Check and Maintenance Procedures

Daily Check Before Operation

Essential pre-operation checks for the tractor's condition and safety.

Initial 50-Hour Service Points

Key maintenance checks required after the first 50 operating hours.

Engine Oil and Filter Service

Procedures for engine oil change and oil filter replacement.

Transmission and Axle Oil Service

Steps for changing transmission and front axle case oil.

Hydraulic System Service

Procedure for replacing the hydraulic oil filter cartridge.

Clutch and Brake Pedal Adjustments

Checking and adjusting clutch pedal free travel and brake pedal free travel.

Cooling System Maintenance

Procedure for flushing the cooling system and changing coolant with anti-freeze.

Fuel System Maintenance

Procedures for cleaning the fuel filter and checking the fuel line.

Battery Maintenance and Charging

Procedure for checking battery condition and performing charging.

Air Cleaner and Fan Belt Service

Instructions for cleaning the air cleaner element and checking fan belt tension.

Clutch System

Clutch Pedal Free Travel Check

Steps to check and adjust clutch pedal free travel.

Front Axle System

Front Axle Checking and Adjusting

Procedures for measuring toe-in and checking front axle rocking force.

Transmission System

Transmission Checking and Adjusting

Procedures for adjusting HST maximum speed, neutral, and pressure checks.

Rear Axle System

Brake System

Steering System

Hydraulic System

Hydraulic System Checks and Servicing

Procedures for checking steering, pumps, relief valve, lift arm, and cylinders.

Electric System

Starting & Stopping System Components

Explanation of switches and conditions for engine starting and stopping.

Related product manuals