GENERAL
KUKJE MACHINERY CO., LTD.
34
4. Mix the anti-freeze with water, and then fill in to
the radiator.
Freezing point Boiling point Vol %
Anti-freeze
℃ ℉ ℃ ℉
40 -24 -12 106 222
50 -37 -34 108 226
* At 760 mmHg pressure (atmospheric). A higher
boiling point is obtained by using a radiator
pressure cap which permits the development of
pressure within the cooling system.
▶ NOTE
1) The above data represents industry standards
that necessitate the minimum glycol content in
the concentrated anti-freeze.
2) When the coolant level drops due to
evaporation, add water only. In the case of
leakage, add anti-freeze and water in the
specified mixing ratio.
3) Anti-freeze absorbs moisture. Keep unused anti-
freeze in a tightly sealed container.
4) Do not use radiator cleaning agent when anti-
freeze had been added to the coolant. (Anti-
freeze contains an anti-corrosive agent, which
will react with the radiator cleaning agent
forming sludge which will affect the engine
parts.)
7. DISASSEMBLING AND SERVICING
<13> OTHERS
To Next Page
Loading...
