GENERAL
KUKJE MACHINERY CO., LTD.
14
< Checking >
▶ Check areas where previous trouble was experienced.
▶ Walk around the tractor.
1. Check the tire pressure, and check for wear and damage.
2. Check for oil and water leaks.
3. Check the engine oil level.
4. Check the transmission fluid level.
5. Check the coolant level.
6. Check the condition of seat belt and ROPS attaching hardware.
7. Check and clean the radiator screen and grill.
8. Check that the bolts and nuts of the tires are tight.
9. Check the number plate or SMV emblem for damage and clean, replace as necessary of equipped.
10. Care of danger, warning, and caution labels.
11. Clean around the exhaust manifold and the muffler of the engine.
▶ While sitting in the operator’s seat.
1. Check the HST pedal, brake pedal and clutch pedal.
2. Check the parking brake.
3. Check the steering wheel.
▶ Turning the key switch.
1. Check the performance of the instrument panel lights.
2. Check the head lights, tail lights and hazard lights. Clean if necessary.
3. Check the performance of the meters and gauges.
▶ Starting the engine.
1. Check to see that the lights on the easy checker go off.
2. Check the color of the exhaust gas.
3. Check the brakes for proper operation.
7. DISASSEMBLING AND SERVICING
<2> CHECK POINTS OF INITIAL 50 HOURS
To Next Page
Loading...
