Branson 2400 - 8> Check Points of Every 800 Hours; 9> Check Points of Every 1500 Hours; 10> Check Points of Every 3000 Hours

GENERAL
KUKJE MACHINERY CO., LTD.
31
< Front axle rocking force >
1. Jack up the front side of tractor.
2. Set a spring balance to the front axle flange.
3. Measure the front axle rocking force.
4. If the measurement is not within the factory
specifications, adjust by the adjusting screw(1).
5. Tighten the lock nut(2) firmly.
Front axle
rocking force
Factory spec.
49.0 to 98.1 N
5.0 to 10.0 kgf
11.0 to 22.1 lbs
*. PART NAME
1) Adjusting screw 2) Lock nut
< Replace fuel filter element >
1. The fuel filter element should be replaced every
400 hours.
*. PART NAME
1) Filter bracket 2) Fuel filter bowl
3) O-ring 4) Filter element
5) O-ring
<8> CHECK POINTS OF EVERY 800 HOURS
< Checking valve clearance >
-. Reference the engine service manual.
<9> CHECK POINTS OF EVERY 1500 HOURS
< Checking fuel injection nozzle injection pressure >
-. Reference the engine service manual.
<10> CHECK POINTS OF EVERY 3000 HOURS
< Checking injection pump >
-. Reference the engine service manual.
<11> CHECK POINTS OF 1 YEAR
< Replace air cleaner primary element and secondary element >
-. Reference the page 24.
7. DISASSEMBLING AND SERVICING
<12> CHECK POINTS OF 2 YEARS