Branson 2400 - 7> Check Points of Every 400 Hours

GENERAL
KUKJE MACHINERY CO., LTD.
30
*. PART NAME
1) Filling plug with dipstick 2) Drain plug
A) Oil level is acceptable within this range
< Changing transmission fluid >
-. Reference the page 16.
< Cleaning transmission oil strainer >
-. Reference the page 17.
< Replace hydraulic oil filter cartridge >
-. Reference the page 17.
< Changing front axle case oil >
1. Place the oil pans underneath the front axle case.
2. Remove the both right and left hand side drain
plugs(2) and filling plug(1) to drain the oil.
3. After draining, reinstall the drain plugs(2).
4. Fill with new oil up to the upper notch on the
dipstick.
◈ Important
¾ After ten minutes, check the oil level again, add
oil to proper level.
¾ Use Branson genuine fluid.
Front axle case
oil capacity
2100
2400(h)
2800(h)
3.0 L
3.17 U.S.qts
0.79 gal
7. DISASSEMBLING AND SERVICING
<7> CHECK POINTS OF EVERY 400 HOURS