BRAKE
KUKJE MACHINERY CO., LTD.
115
5. CHECKING, DISASSEMBLING AND SERVICING
<1> CHECKING AND ADJUSTING
*. PART NAME
1) Brake pedal 2) Turnbuckle
3) Lock nut
L) Free travel
< Adjusting brake pedal free travel >
z Stop the engine and check the wheels before
checking brake pedal.
z The difference between the right and left pedal
free travel must be less than 4.0mm
1. Release the parking brake.
2. Slightly depress the brake pedals and measure
free travel at top of pedal stroke.
3. If the measurement is not within the factory
specifications, loosen the lock nut and turn the
turnbuckle to adjust the brake rod length.
4. Retighten the lock nut securely.
5. Keep the free travel in the right and left brake
pedals equal.
Brake pedal
free travel
Factory spec.
30.0 to 40.0 mm
1.18 to 1.57 in.
▶ NOTE
1) After checking brake pedal free travel, be sure
to engage the parking brake lever fully and
check to see that the brake pedals are securely
locked.
To Next Page
Loading...
