GENERAL
KUKJE MACHINERY CO., LTD.
35
*. PART NAME
A) Fuse box B) Main fuse
< Bleeding fuel system >
Air must removed :
1. When the fuel filter or lines are removed.
2. When tank is completely empty.
3. After the tractor has not been used for a long
period of time.
Bleeding procedure is as follows :
1. Fill the fuel tank with fuel.
2. Start the engine and run for about 30 second,
and then stop the engine.
< Replacing fuse >
1. The tractor electrical system is protected from
potential damage by fuses. A blown fuse
indicates that there is an overload or short
somewhere in the electrical system.
2. If any of the fuses should blow, replace with a
new one of the same capacity.
◈ Important
¾ Before replacing a blown fuse, determine why
the fuse blew and make any necessary repairs.
Failure to follow this procedure may result in
serious damage to the tractor electrical system.
< Replacing light bulb >
1. Head light
Take the bulb out of the light body and replace
with a new one.
2. Other lights
Detach the lens and replace the bulb.
Light Capacity
Head light 55W
Tail light 10W
Turn signal / Hazard light 21W / 21W
Instrument panel light 1.7W
Hazard light switch indicator 0.6W
To Next Page
Loading...
