BR25O436A
STOP/SLOW RETURN VALVE MFWD LEVER
It is used to shift between 2-wheel
drive and 4-wheel drive. Depress the
clutch pedal when shifting the lever.
BR25O437A
It is used to regulate the lowering
speed of the implement (slow return
function). Also, if you wind the valve
fully to the right, the hydraulic pres-
sure to the device raising the imple-
ment is stopped.
PTO LEVER
BR25O438A
The revolution of the PTO shaft can
be shifted in two levels. When shift-
ing level, shift PTO switch to “OFF”
position.
PTO 1
540 RPM
PTO 2 790 RPM (540E)
(1) Stop / Slow Return Valve (1) MFWD Lever (1) PTO Lever
Observe the PTO speed desig-
nated on the implement. Oth-
erwise, the implement may be
damaged and cause an acci-
dent.
•
CAUTION
To Next Page
