To Next PageTo Next Page
Need help?Do you have a question about the Brassmaster PLUS MEGAbite and is the answer not in the manual?
Determine the proper location for MEGAbite installation, ensuring it follows incoming water shutoff and precedes other filters.
Connect the bypass valve for maintenance isolation and water supply continuity. Ensure proper sweat-solder connections.
Attach the drain line fitting and tubing to the control valve, running to a drain with a minimum 1 1/2 inch air gap.
Plug the unit into a separate 120v, 15 amp, ground fault interrupt (GFI) outlet.
Overview of the unit's display indicators and initial steps for placing the system into operation.
Run water through the filter via a faucet until clear to remove media residual and prepare for service.
Instructions on adjusting the unit's current time and day using the control buttons.
Guide to accessing and modifying user programming modes for system settings.
Configure the maximum number of days between regeneration cycles to ensure regular operation.
Set the time of day for the regeneration cycle, offsetting from other water softeners.
Features the Assured Performance Modular (APM) design for easy removal and replacement of valve components.
Provides access to videos demonstrating setup, module removal, and related forms.
Details the warranty period for control valve, mineral tank, and brine tank, and repair/replace policy.
States that express warranties are in lieu of all others, disclaiming merchantability and fitness for a particular purpose.
Lists conditions and damages that void or are excluded from the warranty coverage.
General| Brand | Brassmaster |
|---|---|
| Model | PLUS MEGAbite |
| Category | Water Filtration Systems |
| Language | English |
