Why has my Braun Electric Shaver shaving performance dropped significantly?
A drop in shaving performance of your Braun Electric Shaver can occur if the foil and cutter are worn, in which case you should renew the Foil & Cutter cassette. Another cause can be that the shaving system is clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it properly and tap it out.
Why is my Braun Electric Shaver not charging in the Clean&Charge station?
If charging does not start when your Braun Electric Shaver is connected to the power socket or placed in the Clean&Charge station, ensure the shaver is properly placed in the station so that the contacts align. Charging could also be delayed after long storage, so wait a few minutes to see if it starts automatically. Also, the ambient temperature should be between 5°C to 35°C for charging.
What to do if Braun 5030s Electric Shaver does not charge completely?
If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature may be out of the valid range. The recommended ambient temperature for charging is 5°C to 35°C.
Why won't my Braun 5030s turn on?
If your Braun Electric Shaver isn't starting, check if the travel lock is activated. Press and hold the on/off switch for 3 seconds to unlock it. For the Wet&Dry model 5040s, ensure the shaver is unplugged, as it can only be operated cordless.
What to do if my Braun 5030s is not charging?
If your Braun Electric Shaver's charging doesn't start when connected to a power socket or placed in the Clean&Charge station, make sure the shaver's contacts align properly with the station's contacts. Sometimes, charging may be delayed, especially after long storage, so wait a few minutes to see if it starts automatically. Also, ensure the ambient temperature is within the recommended range of 5°C to 35°C.
Why does my Braun 5030s Electric Shaver head smell bad?
If you notice an unpleasant smell from your Braun Electric Shaver head, it could be because the shaver head is cleaned with water. When cleaning the shaver head with water, use only hot water and occasionally some liquid soap (without abrasive substances), and remove the foil & cutter cassette to let it dry. Also, if the cleaning cartridge has been in use for more than 8 weeks, change it.
Why is my Braun 5030s Electric Shaver consuming cleaning fluid so quickly?
Increased consumption of cleaning fluid in your Braun Electric Shaver's Clean&Renew station could be due to a clogged drain. Clean the drain with a wooden toothpick. Also, regularly wipe the tub clean.
Why is the Clean&Charge station not starting on my Braun 5030s Electric Shaver?
If cleaning doesn't start when you press the start button on your Braun Electric Shaver's Clean&Charge Station, ensure the shaver is properly placed in the station, aligning the contacts. If the cleaning cartridge doesn't contain enough cleaning fluid, indicated by a blinking red level indicator, insert a new cleaning cartridge. Also, check if the appliance is in stand-by mode and press the start button again.
What to do if my Braun Electric Shaver shaving performance dropped significantly?
If your Braun Electric Shaver's shaving performance has significantly dropped, the shaving system may be clogged or the foil and cutter may be worn. Try soaking the foil & cutter cassette into hot water with a drop of liquid dish soap, then rinse it properly, tap it out, and apply a drop of light machine oil on the foil. If the foil and cutter are worn, renew the foil & cutter cassette.
What to do if my Braun 5030s battery performance dropped significantly?
If you notice a significant drop in your Braun Electric Shaver's battery performance, it could be due to worn foil and cutter, requiring more power for each shave. Renewing the Foil & Cutter cassette should resolve this. Also, if you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week for lubrication.
Details charging time, battery life, and recommended temperatures for optimal performance.
Offers three key steps for achieving an optimal dry shave.
Step-by-step guide on manually cleaning the shaver head with water and soap.
Guides on setting up the Clean&Charge Station, including power connection.
Instructions on placing the shaver in the station for charging and hygiene analysis.
Details on inserting the shaver into the station for automatic cleaning.
General| Power Source | Rechargeable Battery |
|---|---|
| Wet & Dry | Yes |
| Charging Time | 1 hour |
| Precision Trimmer | Yes |
| Series | Series 5 |
| Travel Lock | Yes |
| Blades | 3 |
| Precision Mode | No |
| Battery Type | Li-Ion |
| Cordless Use | Yes |
| Corded Use | No |
| Quick Charge | 5 minutes |
| Display | LED |
| Shaver Type | Foil |
| Cleaning | Washable |
| Color | Black |
| Battery Life | 45 minutes |
To Next Page
