To Next PageTo Next PageWhy has my Braun 5030s battery performance dropped significantly?
If your Braun Electric Shaver's battery performance has significantly dropped, it could be due to regularly cleaning the shaver head with water but not lubricating it. To resolve this, apply a drop of light machine oil on top of the foil once a week. Also, check if the foil and cutter are worn, which requires more power; if so, renew the foil & cutter cassette.
How to improve shaving performance of my Braun 5030s Electric Shaver?
If your Braun Electric Shaver's shaving performance has decreased, the shaving system may be clogged. Soak the foil & cutter cassette in hot water with a drop of liquid dish soap, then rinse thoroughly and tap it out. Once dry, apply a drop of light machine oil to the foil. If the foil and cutter are worn, renew the foil & cutter cassette.
Why is my Braun Electric Shaver head damp after cleaning?
If the Braun Electric Shaver head is damp, it could be due to a short drying time after automatic cleaning. Clean directly after shaving to allow enough time for drying. Also, the drain of the Clean&Charge Station might be clogged; clean it with a wooden toothpick. If the cleaning cartridge has been used for a while, the alcohol proportion may have decreased, while the oil proportion has increased, remove residue with a cloth.
Why Braun Electric Shaver does not charge completely and keeps blinking?
If your Braun Electric Shaver isn't charging completely and keeps blinking, it's possible that the ambient temperature is out of the valid range. The recommended ambient temperature for charging is 5 °C to 35 °C.
What to do if my Braun 5030s Electric Shaver charging does not start when connected to power socket?
If your Braun Electric Shaver isn't charging when connected to the power socket, it could be due to several reasons. Charging might be delayed, especially after long storage, so wait a few minutes to see if it starts automatically. Also, ensure the ambient temperature is within the recommended range of 5 °C to 35 °C. Finally, check that the special cord set is properly plugged in and snaps into place.
What to do if my Braun 5030s is not charging?
If your Braun Electric Shaver's charging doesn't start when connected to a power socket or placed in the Clean&Charge station, make sure the shaver's contacts align properly with the station's contacts. Sometimes, charging may be delayed, especially after long storage, so wait a few minutes to see if it starts automatically. Also, ensure the ambient temperature is within the recommended range of 5°C to 35°C.
Why won't my Braun 5030s turn on?
If your Braun Electric Shaver isn't starting, check if the travel lock is activated. Press and hold the on/off switch for 3 seconds to unlock it. For the Wet&Dry model 5040s, ensure the shaver is unplugged, as it can only be operated cordless.
What to do if Braun 5030s Electric Shaver does not charge completely?
If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature may be out of the valid range. The recommended ambient temperature for charging is 5°C to 35°C.
Why is my Braun Electric Shaver not charging in the Clean&Charge station?
If charging does not start when your Braun Electric Shaver is connected to the power socket or placed in the Clean&Charge station, ensure the shaver is properly placed in the station so that the contacts align. Charging could also be delayed after long storage, so wait a few minutes to see if it starts automatically. Also, the ambient temperature should be between 5°C to 35°C for charging.
General| Power Source | Rechargeable Battery |
|---|---|
| Wet & Dry | Yes |
| Charging Time | 1 hour |
| Precision Trimmer | Yes |
| Series | Series 5 |
| Travel Lock | Yes |
| Blades | 3 |
| Precision Mode | No |
| Battery Type | Li-Ion |
| Cordless Use | Yes |
| Corded Use | No |
| Quick Charge | 5 minutes |
| Display | LED |
| Shaver Type | Foil |
| Cleaning | Washable |
| Color | Black |
| Battery Life | 45 minutes |
Details charging time, battery life, and recommended temperatures for optimal performance.
Offers three key steps for achieving an optimal dry shave.
Step-by-step guide on manually cleaning the shaver head with water and soap.
Guides on setting up the Clean&Charge Station, including power connection.
Instructions on placing the shaver in the station for charging and hygiene analysis.
Details on inserting the shaver into the station for automatic cleaning.
