1d Fix comb 1 (1 mm)
1e Fix comb 2 (2 mm)
2a Trimmer head (design can differ)
2b Ear & nose trimmer head*
2c Detailed trimmer head*
2d Body groomer head*
2e Mini foil shaver head*
On/off button
Charging indicator
Power socket
Special cord set (design can differ)
Charging stand*
not with all models
For electric specifications, see printing on the special cord set.
Charging
Recommended ambient temperature for charging is 41 °F to 95 ° F / 5 °C to 35 °C. The battery may not charge
properly or at all under extreme low or high temperatures. Recommended ambient temperature for trimming is 60
°F to 95 °F / 15 °C to 35 °C. Do not expose the appliance to temperatures higher than 122 °F / 50 °C for extended
periods of time.
Connect the appliance (switched off) via the special cord set (6) to an electrical
A full charge takes 1 hour and provides up to 100 minutes of cordless operation time.
Once the appliance is completely charged, discharge it through normal Then recharge again to full capacity.
Charging indicator (4)
The charging indicator blinks green when the appliance is being
It lights up permanently green for a few seconds when the battery is fully During usage it shines permanently
green.
The charging indicator shines permanently red when the battery is running Once it flashes red, connect the
appliance to the mains.
Usage
Exchange the attachments only when the appliance is switched off. To turn the appliance on, push the on/off
button (3).
Travel lock
Press the on/off button (3) for 3 seconds to lock the appliance. A beep confirms that the travel lock is activated. To
unlock, press the on/off button 3 seconds. 3 beeps will sound when your unlock attempt failed. Try again or simply
connect the appliance to the mains.
Beard Trimming / Hair Clipping
Sliding combs (1a, 1b): Place one of the combs over the trimmer head
To Next Page
Loading...
Need help?
General
