30
Trouble-Shooting
Problem: Possible reason: Remedy:
SHAVER
Unpleasant
smell from the
shaver head.
1. Shaver head is
cleaned with water.
2. Cleaning cartridge is
in use for more than
8 weeks.
1. When cleaning the shaver head with
water only use hot water and from time
to time some liquid soap (without
abrasive substances). Remove Foil &
Cutter cassette to let it dry.
2. Change cleaning cartridge at least every
8 weeks.
Battery
performance
dropped
significantly.
1. Foil and cutter are
worn which requires
more power for each
shave.
2.
Shaver head is
regularly cleaned with
water but not
lubricated.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned with
water, apply a drop of light machine oil
on top of the foil once a week for
lubrication.
Shaving
performance
dropped
significantly.
1. Foil and cutter are
worn.
2. Personal setting of
shaving performance
has been changed.
3. Shaving system is
clogged.
1. Renew Foil & Cutter cassette.
2. For a thorough and fast shave we
recommend the green (intensive)
setting.
3. Soak the Foil & Cutter cassette into hot
water with a drop of dish liquid.
Afterwards rinse it properly and tap it
out.
Once dry apply a drop of light machine
oil on the foil.
Shaver turns
off with fully
charged battery.
Foil and cutter are worn
which requires more
power than the motor
can deliver.
The appliance turns off.
– Renew Foil & Cutter cassette.
– Regularly oil the shaving system,
especially when cleaning with water
only.
Battery
segments in the
display are
skipped with
decreasing
battery capacity.
Foil and cutter are worn
which requires more
power for each shave.
– Renew Foil & Cutter cassette.
– Regularly oil the shaving system,
especially when cleaning with water
only.
91508132_7760cc_JP.indd 3091508132_7760cc_JP.indd 30 24.07.17 15:2824.07.17 15:28
CSS APPROVED Effective Date 27Jul2017 GMT - Printed 04Sep2017 Page 30 of 34
To Next Page
Loading...
