To Next PageTo Next PageWhat to do if my Braun 5748 does not start?
If your Braun Electric Shaver isn't starting, the travel lock might be activated. To unlock it, press and hold the on/off switch for 3 seconds. Also, if you have a Wet&Dry model 5040s, make sure it's unplugged, as it can only be used cordlessly.
What to do if my Braun Electric Shaver is not charging?
If charging doesn't start when your Braun Electric Shaver is connected to a power socket or placed in the Clean&Charge station, ensure the shaver's contacts align with those in the Clean&Charge station. Sometimes, charging may be delayed, especially after long storage, so wait a few minutes to see if it starts automatically. Also, the ambient temperature should be between 5°C and 35°C for charging.
Why has my Braun 5748 Electric Shaver battery performance dropped significantly?
If your Braun Electric Shaver's battery performance has significantly decreased, regularly cleaning the shaver head with water but not lubricating it could be the cause. Try applying a drop of light machine oil on top of the foil once a week for lubrication. Also, if the foil and cutter are worn, replace the foil & cutter cassette.
Why has my Braun 5748 shaving performance dropped significantly?
If your Braun Electric Shaver's shaving performance has declined, the shaving system may be clogged or the foil and cutter are worn. Try soaking the foil & cutter cassette in hot water with a drop of liquid dish soap, then rinse it thoroughly and tap it out. Once it's dry, apply a drop of light machine oil on the foil. If that doesn't work, you may need to replace the foil & cutter cassette.
What to do if cleaning does not start on my Braun Electric Shaver Clean&Charge Station?
If cleaning doesn't start when you press the start button on your Braun Electric Shaver's Clean&Charge Station, make sure the shaver is properly placed in the station, ensuring the contacts align. If the cleaning cartridge doesn't contain enough cleaning fluid (level indicator blinks red), insert a new cartridge. Also, if the appliance is in stand-by mode, press the start button again.
Why are battery segments skipped on my Braun 5748 display?
If the battery segments in the display of your Braun Electric Shaver are skipped as the battery capacity decreases, the foil and cutter may be worn, requiring more power for each shave. Replace the foil & cutter cassette. Also, regularly oil the shaving system, especially if you clean it with water only.
Why does my Braun Electric Shaver head smell unpleasant?
If your Braun Electric Shaver head smells unpleasant, it could be due to cleaning the shaver head with water. When cleaning with water, use only hot water and occasionally a bit of liquid soap (without abrasive substances). Remove the foil & cutter cassette to let it dry. Also, if the cleaning cartridge has been in use for more than 8 weeks, replace it.
Why my Braun Electric Shaver does not charge completely?
If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature may be outside the valid range. The recommended ambient temperature for charging is 5°C to 35°C.
Why is my Braun 5748 Electric Shaver head damp?
If your Braun Electric Shaver head is damp, the drying time after automatic cleaning might be too short. Try cleaning the shaver directly after shaving to allow enough time for drying. Also, the drain of the Clean&Charge Station could be clogged; clean it with a wooden toothpick. If the cleaning cartridge has been used for a while, the alcohol proportion may have decreased while the oil proportion has increased; remove residue with a cloth.
General| Brand | Braun |
|---|---|
| Model | 5748 |
| Category | Electric Shaver |
| Language | English |
