To Next PageTo Next PageWhy won't my Braun Electric Shaver turn on?
If your Braun Electric Shaver doesn't start when you press the start button, it might be due to the travel lock being activated. To unlock it, press and hold the on/off switch for 3 seconds. Also, ensure the shaver is unplugged, as it can only be operated cordless.
What to do if my Braun Electric Shaver is not charging?
If your Braun Electric Shaver isn't charging when connected to the power socket or placed in the charging stand/Clean&Charge Station, make sure the shaver's contacts align properly with the contacts in the Clean&Charge Station. Charging might be delayed, especially after long storage, so wait a few minutes to see if it starts automatically. Ensure the ambient temperature is within the recommended range of 41 °F to 95 °F / 5 °C to 35 °C. Also, check that the special cord set is correctly plugged in and snapped into place.
Why does my Braun 5791 turn off with fully charged battery?
If your Braun Electric Shaver turns off even with a fully charged battery, it could be due to worn foil and cutter, which require more power than the motor can deliver. Try replacing the Foil & Cutter cassette. Also, regularly oil the shaving system, especially when cleaning with water only.
Why is my Braun 5791 Electric Shaver blinking and not charging fully?
If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature may be out of the valid range. The recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C.
Why has the battery performance of my Braun 5791 dropped significantly?
If your Braun Electric Shaver battery performance has dropped significantly, it might be because the shaver head is regularly cleaned with water but not lubricated. Apply a drop of light machine oil on top of the foil once a week for lubrication. Also, worn foil and cutter require more power for each shave, so replace the Foil & Cutter cassette.
What to do if cleaning does not start on my Braun 5791 Electric Shaver Clean&Charge Station?
If cleaning does not start when you press the start button on your Braun Electric Shaver's Clean&Charge Station, make sure the shaver is correctly placed in the station, aligning the contacts. Also, ensure the cleaning cartridge contains enough cleaning fluid; if the level indicator blinks red, insert a new cartridge. Finally, check if the appliance is in stand-by mode and press the start button again.
Why does my Braun 5791 head smell bad?
An unpleasant smell from your Braun Electric Shaver head can occur if the shaver head is cleaned with water. When cleaning the shaver head with water, only use hot water and occasionally some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to let it dry. Also, if you're using a cleaning cartridge, replace it at least every 8 weeks.
Why has my Braun Electric Shaver shaving performance dropped significantly?
If your Braun Electric Shaver's shaving performance has declined, the shaving system might be clogged. Try soaking the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it thoroughly and tap it out. Once it's dry, apply a drop of light machine oil to the foil. Also, the foil and cutter may be worn, so consider replacing the Foil & Cutter cassette.
How to unlock Braun 5791 if it does not start?
If your Braun Electric Shaver does not start, it might be due to the travel lock being activated. To unlock it, press the on/off switch for 3 seconds. Also, if you have a wet&dry model 9095cc w&d/9040s, ensure the shaver is unplugged, as it can only be operated cordlessly.
Why does my Braun 5791 not charge completely and keeps blinking?
If your Braun Electric Shaver does not charge completely and keeps blinking, it may be due to the ambient temperature being outside the valid range. The recommended ambient temperature for charging is 5 °C to 35 °C.
General| Model | 5791 |
|---|---|
| Wet/Dry Use | Yes |
| Shaver Type | Foil |
| Display | Yes |
| Travel Lock | Yes |
| Automatic Voltage Adaptation | Yes |
| Series | Series 5 |
| Blades | 3 |
| Precision Trimmer | Yes |
| Cordless Use | Yes |
| Cleaning Station | No |
| Travel Case | Yes |
| Warranty | 2 years |
| Type | Electric Shaver |
| Power Source | Battery |
| Charging Time | 60 min |
| Usage Time | 50 minutes |
| Quick Charge | 5 min |
Guides users through the setup and installation process of the Clean&Charge Station.
Explains how to correctly place the shaver in the station for charging.
Describes the automatic cleaning cycle initiated via the Clean&Charge Station.
Provides instructions on how to safely detach the shaver from the charging station.
