Braun 5793 - Foil & Cutter Replacement; Shaver Cleaning; Cleaning Under Running Water; Cleaning with a Brush

33
• Slide the Multi Head Lock switch (3) down to lock the shaver head.
• Move the shaver head manually to your desired position.
• For automatic cleaning in the Clean & Charge Station the head lock needs to be
released.
Precision trimmer
The trimmer can be used to trim sideburns, moustache or beard.
• Press the release button (8) and slide the trimmer (6) upwards.
Travel lock
The shaver can be locked to avoid unintended starting of the motor (e.g. for storing in
a suitcase).
• Press the on / off button (4) for 5 seconds to lock / unlock the shaver. This is
confirmed by a beep sound and the lock icon appearing / disappearing on the
display.
Foil replacement
To maintain 100% shaving performance, replace the Foil & Cutter cassette (1), when
the foil replacement indicator lights up (and no status segments are visible).
• To remove the Foil & Cutter cassette press the release buttons (2).
• Press the on / off button for 10 seconds to reset the counter.
• Afterwards you need to unlock the shaver (see chapter «Travel lock»).
• On some shaver models the replacement indicator will reset automatically after
7 shaves.
Cleaning
Cleaning under running water
Especially important after foam or gel usage
• Switch on the shaver cordless and rinse the shaver head under hot running
water until all residues have been removed. You may use liquid soap without
abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
• Next, switch off the shaver, press the release buttons (2) to remove the Foil & Cutter
cassette (1) and let it dry.
• If you regularly clean the shaver under water, apply a drop of light machine oil on top
of the Foil & Cutter cassette once a week.
The shaver needs to be cleaned under running water after each foam or gel
usage!
Cleaning with a brush
• Switch off the shaver. Remove the Foil & Cutter cassette (1) and tap it out on a flat
surface. Using the brush, clean the inner area of the pivoting head. Do not clean the
cassette with the brush as this may damage it!
Clean & Charge Station (C & C)*
The Clean & Charge Station has been developed for cleaning, charging, lubricating,
disinfecting, drying and storing your Braun shaver.
91611495_93XX_wet&dry_JP.indd 3391611495_93XX_wet&dry_JP.indd 33 26.10.17 14:2226.10.17 14:22
Business Use - P&G AUTHORIZED 91754369 Rev 001 Effective Date 2017-11-02 Printed 2018-07-25 Page 33 of 40