EasyManua.ls Logo

Braun 5793 - Clean & Charge Station Installation; Clean & Charge Station Operation; Charging in the Clean & Charge Station; Cleaning in the Clean & Charge Station

Braun 5793
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
12 Station power socket
13 Lift button for cartridge exchange
14 Station-to-shaver contacts
15 Clean & Charge Station display
15a Level indicator
15b Status light
15c Cleaning program indicators*
16 Start button
17 Cleaning cartridge
* not with all models (see display box)
C & C Installation
Remove the protection foil from the C & C display.
Press the lift button (13) at the rear side of the C & C to lift the housing.
Hold the cleaning cartridge (17) down on a flat, stable surface (e.g. table).
Carefully remove the lid from the cartridge.
Slide the cartridge from the rear side into the base of the station until it snaps in.
Slowly close the housing by pushing it down until it locks.
Using the power supply (10), connect the station power socket (12) to an electrical
outlet.
C & C Usage
Important: The shaver needs to be dry and free from any foam, gel or soap
residue!
Insert the shaver in the C & C upside down, with the front showing and head lock (3)
released.
The contacts (7) on the back of the shaver need to align with the contacts (14) in the
C & C. Push the shaver backwards in the correct position. A beep sound confirms
that the shaver sits properly in the C & C.
Only C & C with cleaning program selection: The C & C analyses the hygiene status.
The status is shown by the cleaning program indicators (15c) in the C & C display (15).
Charging the shaver in the C & C
Charging will start automatically when the shaver has been inserted properly.
Cleaning the shaver in the C & C
When the cleaning indicator lights up on the shaver display, insert the shaver into the
C & C, as described above.
Cleaning programs (not with all models)
short / economical cleaning
normal level of cleaning
intensive cleaning
Each cleaning program consists of several cycles, where cleaning fluid is flushed
through the shaver head.
91611495_93XX_wet&dry_JP.indd 3491611495_93XX_wet&dry_JP.indd 34 26.10.17 14:2226.10.17 14:22
Business Use - P&G AUTHORIZED 91754369 Rev 001 Effective Date 2017-11-02 Printed 2018-07-25 Page 34 of 40

Other manuals for Braun 5793

Related product manuals