Braun 750 cc-3 User Manual (English)

Questions and Answers:

S
Sheila StokesSep 4, 2025
Why has my Braun 750 cc-3 shaving performance dropped?
- J
  Jesus ReyesSep 4, 2025
  A drop in shaving performance of your Braun Electric Shaver may be due to several reasons: * The foil and cutter are worn and need replacement. * Your personal setting of shaving performance has been changed; for a more thorough and faster shave, the green (intensive) setting is recommended. * The shaving system is clogged; try soaking the foil & cutter cassette in hot water with a drop of dish liquid, then rinse and tap it out. Once dry, apply a drop of light machine oil to the foil.
R
Ronald WaltonAug 23, 2025
What to do if my Braun 750 cc-3 turns off with a fully charged battery?
- R
  Ronald FergusonAug 23, 2025
  If your Braun Electric Shaver turns off even with a fully charged battery, it could be because: * The foil and cutter are worn, demanding more power than the motor can provide. Consider renewing the foil & cutter cassette. * The shaving system needs oiling. Regularly oil the shaving system, especially after cleaning it with water only.
K
Kara KeithSep 2, 2025
How to get rid of the unpleasant smell from my Braun 750 cc-3 Electric Shaver head?
- B
  bsmithSep 2, 2025
  If you notice an unpleasant smell coming from the shaver head of your Braun Electric Shaver, it might be because the shaver head is cleaned with water. When cleaning the shaver head with water, use only hot water and, occasionally, a bit of liquid soap (without abrasive substances). Remember to remove the Foil & Cutter cassette and allow it to dry completely.
J
Jamie LongSep 1, 2025
What to do if shaving system is still wet after cleaning Program has been completed in Braun Electric Shaver?
- J
  Justin RamosSep 1, 2025
  If the shaving system of your Braun Electric Shaver remains wet after the cleaning program, it could be due to a clogged drain in the Clean&Renew station or an old cleaning cartridge. Try cleaning the drain with a wooden toothpick and regularly wipe the tub clean. If that doesn't work, the ethanol proportion has decreased while the oil proportion has increased in the cleaning cartridge. Remove residue with a cloth.
J
Joshua PetersonAug 31, 2025
What to do if battery performance dropped significantly in my Braun 750 cc-3?
- M
  Michael KingAug 31, 2025
  If you notice a significant drop in your Braun Electric Shaver's battery performance, it could be due to worn foil and cutter requiring more power, or the shaver head being regularly cleaned with water but not lubricated. Consider replacing the Foil & Cutter cassette. If you regularly clean the shaver with water, apply a drop of light machine oil on top of the foil once a week for lubrication.
C
crosssandraAug 30, 2025
Why is there increased consumption of cleaning fluid in my Braun 750 cc-3?
- D
  Daniel AdamsAug 30, 2025
  Increased consumption of cleaning fluid is often due to a clogged drain in the Clean&Renew station. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
K
Kenneth FullerAug 29, 2025
Why is the shaver head of my Braun 750 cc-3 Electric Shaver damp?
- B
  Brittany LopezAug 29, 2025
  A damp shaver head may occur if the drying time after automatic cleaning was too short (clean directly after shaving to allow enough time for drying). Also, the drain of the Clean&Renew station may be clogged (clean the drain with a wooden toothpick and regularly wipe the tub clean). The cleaning cartridge might have been used for a while (remove residue with a cloth, since the ethanol/isopropanol proportion has decreased while the oil proportion has increased).
A
Alicia Olson DVMAug 28, 2025
How to get rid of the unpleasant smell from Braun 750 cc-3 Electric Shaver head?
- M
  Melissa BarajasAug 28, 2025
  An unpleasant smell may arise if the shaver head is cleaned with water (use only hot water and, occasionally, liquid soap without abrasive substances; remove the Foil & Cutter cassette to let it dry). Also, replace the cleaning cartridge at least every 8 weeks.
H
harrisaprilAug 27, 2025
What to do if shaving performance dropped significantly on my Braun 750 cc-3 Electric Shaver?
- T
  Terry CarterAug 27, 2025
  A significant drop in shaving performance with your Braun Electric Shaver can be caused by several factors. First, the foil and cutter may be worn and need replacement. Second, check if the personal setting for shaving performance has been changed. For a thorough and fast shave, the green (intensive) setting is recommended. Third, the shaving system might be clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it properly, tap it out, and apply a drop of light machine oil once it's dry.
T
Troy MartinAug 27, 2025
Why has my Braun Electric Shaver's shaving performance dropped significantly?
- M
  Miguel BlairAug 27, 2025
  A significant drop in shaving performance of your Braun Electric Shaver can be due to several reasons: worn foil and cutter, a changed personal setting, or a clogged shaving system. To resolve this, renew the Foil & Cutter cassette. For a thorough and fast shave we recommend the green (intensive) setting. Also, soak the Foil & Cutter cassette into hot water with a drop of dish liquid, rinse it properly, tap it out, and apply a drop of light machine oil on the foil once dry.