To Next PageTo Next PageWhat to do if my Braun Electric Shaver turns off with a fully charged battery?
If your Braun Electric Shaver turns off even with a full charge, the foil and cutter may be worn, demanding more power than the motor can provide. Try replacing the Foil & Cutter cassette. Regularly oiling the shaving system, particularly after cleaning it with water, can also help.
How to get rid of the unpleasant smell from my Braun Electric Shaver head?
An unpleasant smell from your Braun Electric Shaver head can occur if it's cleaned with water alone or if the cleaning cartridge has been in use for over 8 weeks. When cleaning with water, use hot water and occasionally a bit of liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to allow it to dry properly. Replace the cleaning cartridge at least every 8 weeks.
Why is the shaver head of my Braun 7880cc Electric Shaver still damp after cleaning?
A damp shaver head on your Braun Electric Shaver after cleaning can result from a short drying time after automatic cleaning. Clean directly after shaving to allow sufficient drying time. A clogged drain in the Clean&Renew station can also cause this; clean it with a wooden toothpick and regularly wipe the tub clean. If the cleaning cartridge has been used for a while, the ethanol/isopropanol proportion may have decreased, while the oil proportion increased, remove residue with a cloth.
Why is there increased consumption of cleaning fluid in my Braun Electric Shaver's cleaning station?
Increased cleaning fluid consumption in your Braun Electric Shaver's cleaning station is often due to a clogged drain. Clean the drain with a wooden toothpick and regularly wipe the tub clean to resolve this.
Why has my Braun 7880cc shaving performance dropped significantly?
A drop in shaving performance for your Braun Electric Shaver may be due to several factors. The foil and cutter may be worn and need replacement. Ensure your shaver is set to the green (intensive) setting for optimal performance. The shaving system could be clogged; try soaking the Foil & Cutter cassette in hot water with a drop of dish liquid, rinsing it thoroughly, tapping it out, and applying a drop of light machine oil once dry.
Why has the battery performance of my Braun 7880cc Electric Shaver dropped significantly?
Reduced battery performance in your Braun Electric Shaver could be due to worn foil and cutter, requiring more power. Replacing the Foil & Cutter cassette can resolve this. Also, if you regularly clean the shaver head with water, ensure you lubricate it weekly with a drop of light machine oil on top of the foil.
Why are battery segments in the display skipped on my Braun 7880cc as the battery decreases?
Skipped battery segments on your Braun Electric Shaver indicate that the foil and cutter are likely worn, causing the shaver to require more power. Replacing the Foil & Cutter cassette and regularly oiling the shaving system, especially after cleaning with water, should improve this.
What to do if cleaning does not start on my Braun 7880cc when pressing the start button?
If the cleaning cycle doesn't start when you press the start button on your Braun Electric Shaver, make sure the shaver is correctly placed in the Clean&Renew station, ensuring the shaver's contacts align with the station's contacts. Also, check if the cleaning cartridge needs replacing (if the display lights red). If neither, try pressing the start button again.
General| Type | Electric Shaver |
|---|---|
| Model | 7880cc |
| Series | Series 7 |
| Cleaning System | Clean & Charge Station |
| Wet & Dry Use | Yes |
| Precision Trimmer | Yes |
| Head Type | Flexible Shaving Head |
| Battery Life | Up to 50 minutes |
| Charging Time | 1 hour |
| Travel Lock | Yes |
| Power Source | Rechargeable Battery |
| Operating Time | 50 minutes |
| Quick Charge | Yes |
| Voltage | 100-240V |
| Shaving Elements | 4 |
| Shaving Technology | Sonic Technology |
| Battery Type | Li-ion |
| Cordless Shaving Time | 50 minutes |
| Waterproof | Yes |
| Shaver Type | Foil |
| Display | LED |
Details risks of electric shock and necessary precautions.
Step-by-step guide to setting up the Clean&Renew station.
Instructions on how to charge and clean the shaver using the station.
Basic instructions on operating the shaver.
Provides three essential tips for achieving the best dry shave.
Guides on using the Clean&Renew station for automatic cleaning.
Guide to replacing the foil/cutter and resetting the shaver indicator.
