EasyManua.ls Logo

Braun 7865cc - User Manual

Braun 7865cc
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Series 7
Type 5697
www.braun.com
7880cc
7867cc
7865cc
7850cc
e
569
7
w
w
br
au
n
co
90793898/I-16
Stapled booklet, 120 x 170 mm, 116 p (incl. 8 p cover), 2/2c = black + cyan

Questions and Answers

  • J
    Jose EnglishSep 19, 2025
    Why are battery segments skipped on my Braun Rechargeable shaver display?
    • L
      lindsayramirezSep 22, 2025
      Skipped battery segments on your Braun Rechargeable shaver's display, even with decreasing battery capacity, can happen if the foil and cutter are worn, requiring more power for each shave. Replace the Foil & Cutter cassette to resolve this. Also, regularly oil the shaving system, especially if you clean it with water only.
  • T
    Tara KochAug 25, 2025
    What to do if the Braun 7865cc head is damp?
    • J
      Jeffery FitzgeraldAug 25, 2025
      If the shaver head of your Braun Electric Shaver is damp, consider these possibilities: 1. Insufficient drying time after automatic cleaning. 2. A clogged drain in the Clean&Renew station. 3. Extended use of the cleaning cartridge. Clean the shaver directly after shaving to allow ample drying time. Clean the drain with a wooden toothpick and regularly wipe the tub clean. If the cleaning cartridge has been used for a while, the ethanol/isopropanol proportion has decreased while the oil proportion has increased; remove residue with a cloth.
  • S
    Sheila MorrisAug 25, 2025
    What to do if cleaning doesn't start on my Braun Electric Shaver?
    • G
      George MasonAug 26, 2025
      If the cleaning cycle doesn't start when you press the start button on your Braun Electric Shaver's Clean&Renew station, check the following: 1. Ensure the shaver is properly placed in the station, with the contacts aligned. 2. Verify the cleaning cartridge has sufficient fluid (if the display lights red, it needs replacing). 3. Confirm the appliance is not in standby mode; press the start button again.
  • J
    johnjimenezAug 26, 2025
    What to do if my Braun 7865cc turns off with a fully charged battery?
    • T
      timothyatkinsonAug 26, 2025
      If your Braun Electric Shaver turns off even with a full charge, the foil and cutter may be worn, demanding more power than the motor can provide. Try replacing the Foil & Cutter cassette. Regularly oiling the shaving system, particularly after cleaning it with water, can also help.
  • H
    harrisjennaSep 23, 2025
    How to remove the unpleasant smell from my Braun Rechargeable shaver head?
    • D
      Dr. Luis MorrowSep 23, 2025
      An unpleasant smell from your Braun Rechargeable shaver head may be due to: 1. Cleaning the shaver head with water. Only use hot water and, occasionally, liquid soap (without abrasive substances) when cleaning the shaver head with water. Remove the Foil & Cutter cassette to let it dry. 2. Using a cleaning cartridge for too long. Replace the cleaning cartridge at least every 8 weeks.
  • K
    Kathleen BrooksSep 23, 2025
    Why is my Braun Rechargeable shaver consuming cleaning fluid so quickly?
    • T
      Tim OconnorSep 23, 2025
      Increased cleaning fluid consumption in your Braun Rechargeable shaver could be due to a clogged drain in the Clean&Renew station. Clean the drain with a wooden toothpick. Also, regularly wipe the tub clean.
  • C
    Christian DavilaSep 10, 2025
    What to do if the replacement symbol is still on after changing shaving parts on my Braun 7865cc?
    • J
      Jeremy PetersonSep 10, 2025
      If the replacement symbol lights up on your Braun Electric Shaver even after changing the shaving parts, it means that the reset button has not been pushed. Push the reset button for at least 3 seconds to reset the counter.
  • M
    Melissa WalkerSep 12, 2025
    Why has my Braun 7865cc shaving performance dropped significantly?
    • C
      Craig GloverSep 12, 2025
      A drop in shaving performance for your Braun Electric Shaver may be due to several factors. The foil and cutter may be worn and need replacement. Ensure your shaver is set to the green (intensive) setting for optimal performance. The shaving system could be clogged; try soaking the Foil & Cutter cassette in hot water with a drop of dish liquid, rinsing it thoroughly, tapping it out, and applying a drop of light machine oil once dry.
  • S
    Sandra WoodwardSep 3, 2025
    What to do if cleaning doesn't start when pressing the start button on my Braun Rechargeable shaver?
    • T
      Tina DavisSep 4, 2025
      If the cleaning cycle doesn't start when you press the start button on your Braun Rechargeable shaver, consider the following: 1. Ensure the shaver is correctly placed in the Clean&Renew station, with the shaver's contacts aligned with the station's contacts. 2. Check if the cleaning cartridge has sufficient cleaning fluid; a red light indicates it needs replacement. Insert a new cleaning cartridge if necessary. 3. Verify the appliance isn't in standby mode. Press the start button again to initiate cleaning.
  • N
    Nicholas HarrisSep 1, 2025
    Why has my Braun Rechargeable shaver's battery life decreased significantly?
    • S
      Shelly FosterSep 1, 2025
      A significant drop in battery performance in your Braun Rechargeable shaver can occur due to: 1. Worn foil and cutter, which increases the power needed for each shave. To resolve this, renew the Foil & Cutter cassette. 2. Regular cleaning of the shaver head with water without lubrication. If you clean the shaver with water, apply a drop of light machine oil on top of the foil once a week.

Overview

The Braun Series 7 shaver is a sophisticated grooming system designed for high-quality, functional, and ergonomic shaving. This system includes a shaver and a Clean&Renew station, offering both automatic cleaning and charging capabilities.

Function Description:

The Braun Series 7 shaver is primarily designed for dry shaving, but it is also suitable for wet use in a bath or shower, operating cordlessly for safety. It features a pivoting shaver head and flexible foils that automatically adjust to facial contours, ensuring an optimal shave. For precise trimming of sideburns, mustaches, or beards, a pop-out long hair trimmer is integrated. The shaver offers personalized settings, allowing users to adjust shaving power from sensitive to intensive based on individual needs and facial areas.

The Clean&Renew station serves multiple functions: charging, cleaning, and drying the shaver. It automatically analyzes the shaver's hygiene status and selects one of three cleaning programs (short economical, normal, or high intensive) or indicates if the shaver is clean. The station uses a cleaning cartridge containing a highly flammable liquid (ethanol or isopropanol) for hygienic cleaning and lubrication.

Important Technical Specifications:

  • Power Supply: The shaver system uses a special cord set with an integrated Safety Extra Low Voltage power supply. If the appliance is marked with "C 492," it is compatible with any Braun power supply coded 492-XXXX.
  • Battery: A full charge takes approximately 1 hour and provides up to 50 minutes of cordless shaving time. A 5-minute quick charge is sufficient for one shave.
  • Charging Temperature: Recommended ambient temperature for charging is 5 °C to 35 °C.
  • Shaving Temperature: Recommended ambient temperature for shaving is 15 °C to 35 °C. The shaver should not be exposed to temperatures higher than 50 °C for extended periods.
  • Cleaning Cartridge: Contains a highly flammable liquid. Each cartridge, if not used daily, should be replaced after approximately 8 weeks to ensure optimal disinfection. A cartridge is sufficient for about 30 cleaning cycles with daily use.
  • Foil & Cutter Cassette: The Foil & Cutter cassette (model 70S/70B) should be replaced approximately every 18 months or when the replacement symbol (16c) lights up on the shaver display.
  • Water Resistance: The shaver is suitable for cleaning under running water and for use in a bath or shower.

Usage Features:

  • On/Off Switch (12): Activates and deactivates the shaver.
  • Shaver Head Lock Switch (10): Allows locking the pivoting head at a specific angle for shaving hard-to-reach areas, such as under the nose.
  • Pop-out Long Hair Trimmer (11): Slides upwards for trimming.
  • Setting Buttons (-/+ 13, 14): Adjust shaving power from sensitive (light blue, dark blue, green indicator) to intensive (green indicator). The last used setting is automatically activated upon next use.
  • Reset Button (15): Used to manually reset the replacement symbol after changing the Foil & Cutter cassette.
  • Shaver Display (16): Shows battery charge status (green charging lights 16a), low-charge warning (red light 16b), and replacement symbol (16c).
  • Clean&Renew Station Operation:
    • Lift Button (2): Opens the housing for cartridge exchange.
    • Start Button (4): Initiates the selected cleaning program.
    • Cleaning Fluid Display (1): Indicates the remaining cleaning fluid in the cartridge (up to 30 cycles, up to 7 cycles remaining, or new cartridge required).
    • Cleaning Program Indicators (5): LEDs show the selected cleaning program (clean, short economical, normal, high intensive).
    • Stand-by Mode: The station enters stand-by mode 10 minutes after charging or cleaning, turning off its indicators.

Maintenance Features:

  • Automatic Cleaning (via Clean&Renew Station): After each shave, placing the shaver in the station initiates automatic charging and cleaning based on the shaver's hygiene status. The cleaning process flushes the shaver head with cleaning fluid and then dries it.
  • Manual Cleaning (under running water): The shaver can be switched on (cordless) and rinsed under hot running water to remove residues. Liquid soap without abrasive substances can be used occasionally. After rinsing, the Foil & Cutter cassette (8) should be removed by pressing the release button (9) and allowed to dry.
  • Lubrication: If regularly cleaned under water, a drop of light machine oil should be applied to the Foil & Cutter cassette and the long hair trimmer once a week.
  • Cleaning with a Brush: The inner area of the pivoting head can be cleaned with a brush after removing the Foil & Cutter cassette. The cassette itself should not be cleaned with a brush.
  • Housing Cleaning: The shaver and Clean&Renew station housing can be wiped with a damp cloth, especially the cleaning chamber.
  • Cleaning Cartridge Replacement: After pressing the lift button (2), wait a few seconds before removing the used cartridge to avoid dripping. Close the openings of the used cartridge with the lid of the new one before discarding.
  • Foil & Cutter Cassette Replacement: Replace the Foil & Cutter cassette (8) when the replacement symbol (16c) lights up or after approximately 18 months. After replacement, press the reset button (15) for at least 3 seconds to reset the counter.
  • Troubleshooting: The manual provides solutions for common issues such as unpleasant smell, decreased battery performance, reduced shaving performance, shaver turning off, skipped battery segments, and cleaning station malfunctions.

The Braun Series 7 is designed for convenience and longevity, with features that ensure optimal shaving performance and hygiene through both manual and automated maintenance.

Braun 7865cc Specifications

General IconGeneral
TypeElectric Shaver
Model7865cc
SeriesSeries 7
Cleaning SystemYes
Wet & Dry UseYes
Power SourceBattery
Battery TypeLi-ion
Run Time50 minutes
Charge Time1 hour
Precision TrimmerYes
Cordless UseYes
Auto VoltageYes
Blades4
Travel CaseYes
DisplayLED
Shaving TechnologySonic
Shaver TypeFoil Shaver
Quick Charge5 minutes for 1 shave

Related product manuals