Braun 7867cc User Manual (English)

Questions and Answers:

L
Latoya AtkinsonSep 14, 2025
What to do if cleaning does not start on my Braun 7867cc Electric Shaver when pressing the start button?
- M
  Margaret MccoySep 14, 2025
  If the cleaning cycle doesn't start when you press the start button on your Braun Electric Shaver, make sure the shaver is correctly placed in the Clean&Renew station, ensuring the shaver's contacts align with the station's contacts. Also, check if the cleaning cartridge needs replacing (if the display lights red). If neither, try pressing the start button again.
S
Samantha HahnAug 25, 2025
What to do if the Braun Electric Shaver head is damp?
- J
  Jacob ScottAug 25, 2025
  If the shaver head of your Braun Electric Shaver is damp, consider these possibilities: 1. Insufficient drying time after automatic cleaning. 2. A clogged drain in the Clean&Renew station. 3. Extended use of the cleaning cartridge. Clean the shaver directly after shaving to allow ample drying time. Clean the drain with a wooden toothpick and regularly wipe the tub clean. If the cleaning cartridge has been used for a while, the ethanol/isopropanol proportion has decreased while the oil proportion has increased; remove residue with a cloth.
S
Susan EdwardsAug 25, 2025
What to do if cleaning doesn't start on my Braun Electric Shaver?
- J
  Jennifer BergerAug 26, 2025
  If the cleaning cycle doesn't start when you press the start button on your Braun Electric Shaver's Clean&Renew station, check the following: 1. Ensure the shaver is properly placed in the station, with the contacts aligned. 2. Verify the cleaning cartridge has sufficient fluid (if the display lights red, it needs replacing). 3. Confirm the appliance is not in standby mode; press the start button again.
E
emilygreenAug 27, 2025
What to do if my Braun 7867cc Electric Shaver turns off with a fully charged battery?
- M
  Maria RitterAug 27, 2025
  If your Braun Electric Shaver turns off even with a full charge, the foil and cutter may be worn, demanding more power than the motor can provide. Try replacing the Foil & Cutter cassette. Regularly oiling the shaving system, particularly after cleaning it with water, can also help.
K
Kristin SmithAug 27, 2025
How to get rid of the unpleasant smell from my Braun 7867cc Electric Shaver head?
- B
  brianalvarezAug 27, 2025
  An unpleasant smell from your Braun Electric Shaver head can occur if it's cleaned with water alone or if the cleaning cartridge has been in use for over 8 weeks. When cleaning with water, use hot water and occasionally a bit of liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to allow it to dry properly. Replace the cleaning cartridge at least every 8 weeks.
W
williamsadamSep 12, 2025
Why is my Braun Electric Shaver consuming more cleaning fluid?
- J
  Jonathan TaylorSep 12, 2025
  If you notice increased consumption of cleaning fluid with your Braun Electric Shaver, it is likely that the drain of the Clean&Renew station is clogged. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
K
Kayla TaylorSep 10, 2025
What to do if the replacement symbol is still on after changing shaving parts on my Braun Electric Shaver?
- M
  Michelle HowardSep 10, 2025
  If the replacement symbol lights up on your Braun Electric Shaver even after changing the shaving parts, it means that the reset button has not been pushed. Push the reset button for at least 3 seconds to reset the counter.
D
Douglas SchultzSep 12, 2025
Why has my Braun Electric Shaver shaving performance dropped significantly?
- N
  nortonalexanderSep 12, 2025
  A drop in shaving performance for your Braun Electric Shaver may be due to several factors. The foil and cutter may be worn and need replacement. Ensure your shaver is set to the green (intensive) setting for optimal performance. The shaving system could be clogged; try soaking the Foil & Cutter cassette in hot water with a drop of dish liquid, rinsing it thoroughly, tapping it out, and applying a drop of light machine oil once dry.
E
eric71Sep 3, 2025
What to do if cleaning doesn't start when pressing the start button on my Braun Rechargeable shaver?
- G
  griffindavidSep 4, 2025
  If the cleaning cycle doesn't start when you press the start button on your Braun Rechargeable shaver, consider the following: 1. Ensure the shaver is correctly placed in the Clean&Renew station, with the shaver's contacts aligned with the station's contacts. 2. Check if the cleaning cartridge has sufficient cleaning fluid; a red light indicates it needs replacement. Insert a new cleaning cartridge if necessary. 3. Verify the appliance isn't in standby mode. Press the start button again to initiate cleaning.
B
Brent WalshSep 1, 2025
Why has my Braun Rechargeable shaver's battery life decreased significantly?
- M
  Megan McgeeSep 1, 2025
  A significant drop in battery performance in your Braun Rechargeable shaver can occur due to: 1. Worn foil and cutter, which increases the power needed for each shave. To resolve this, renew the Foil & Cutter cassette. 2. Regular cleaning of the shaver head with water without lubrication. If you clean the shaver with water, apply a drop of light machine oil on top of the foil once a week.

Braun 7867cc Specifications

General

Type	Electric Shaver
Model	7867cc
Series	Series 7
Shaver Type	Foil
Power Source	Rechargeable battery
Battery Life	50 minutes
Charging Time	1 hour
Wet & Dry Use	Yes
Operating Time	50 minutes
Display	Yes
Travel Lock	Yes
Voltage	100-240 V
Blades	4
Precision Trimmer	Yes
Waterproof	Yes
Display Type	LED
Cleaning System	Clean & Charge Station
Head Type	Flexible head
Quick Charge	5 minutes