48
• Hold the cleaning cartridge (17) down on a flat, stable
surface (e.g. table).
• Carefully remove the lid from the cartridge.
• Slide the cartridge from the rear side into the base of the
station until it snaps in.
• Slowly close the housing by pushing it down until it locks.
• Using the power supply (10), connect the station power
socket (12) to an electrical outlet.
C & C Usage
Important: The shaver needs to be dry and free from any
foam, gel or soap r
esidue!
• Insert the shaver in the C & C upside down, with the front
showing and head lock (3) released.
• The contacts (7) on the back of the shaver need to align with
the contacts (14) in the C & C. Push the shaver backwards in
the correct position. A beep sound confirms that the shaver
sits properly in the C & C.
• Only C & C with cleaning program selection: The C & C
analyses the hygiene status. The status is shown by the
cleaning program indicators (15c) in the C & C display (15).
Charging the shaver in the C & C
Charging will start automatically when the shaver has been
inserted properly.
Cleaning the shaver in the C & C
When the cleaning indicator lights up on the shaver display,
insert the shaver into the C & C, as described above.
Cleaning programs (not with all models)
short / economical cleaning
normal level of cleaning
intensive cleaning
90933746_83XX_W&D_CC&SOLO_CN-KR-ANZ.indd 4890933746_83XX_W&D_CC&SOLO_CN-KR-ANZ.indd 48 04.09.19 10:2104.09.19 10:21
Page 51 of 63
P&G RELEASE 09/04/2019 08:55:36 AM Printed 2019-09-04
To Next Page
Loading...
