Braun 9385cc User Manual (English)

Other manuals for Braun 9385cc

Questions and Answers:

K
Kathy WhiteSep 8, 2025
What to do if my Braun 9385cc cleaning does not start when pressing the start button?
- S
  Sharon BakerSep 8, 2025
  If the cleaning cycle doesn't start when you press the start button on your Braun Electric Shaver's Clean & Charge Station, make sure the shaver is correctly placed in the station, pushed to the rear so that the contacts align. If the cleaning cartridge does not contain sufficient cleaning fluid (display blinks red), insert a new cleaning cartridge and press the start button again. Also, ensure that the appliance is not in stand-by mode, and if so, press the start button again.
A
Ashley WatsonAug 23, 2025
Why my Braun Electric Shaver does not start when pressing the on / off button?
- M
  Matthew Smith MDAug 23, 2025
  The Braun Electric Shaver can only be operated cordless. If your shaver doesn't start when pressing the on/off button, the travel lock might be activated. Unplug the shaver and press the on/off button for 5 seconds to unlock it.
L
luceroryanAug 25, 2025
What to do if my Braun 9385cc is not charging?
- I
  Isaac ScottAug 25, 2025
  If your Braun Electric Shaver isn't charging when connected to a power socket or placed in the Clean & Charge Station, it could be due to several reasons. Charging might be delayed, especially after long storage, so wait a few minutes for it to start automatically. Ensure the ambient temperature is within the recommended range of 5 °C to 35 °C. Check that the power supply is properly plugged into the shaver and that the shaver's contacts align with those in the Clean & Charge Station.
R
Rebecca WheelerAug 26, 2025
How to fix a Braun Electric Shaver that does not start?
- M
  Michelle MartinezAug 26, 2025
  If your Braun Electric Shaver is not starting when you press the on/off button, unplug the shaver. Also, try pressing and holding the on/off button for 5 seconds to unlock the shaver.
S
scott38Aug 27, 2025
What to do if my Braun 9385cc Electric Shaver charging does not start?
- J
  Joshua MedinaAug 27, 2025
  If charging doesn't start when your Braun Electric Shaver is connected to a power socket or placed in the Clean & Charge Station, wait a few minutes, as charging may be delayed, especially after long storage. Charging should start automatically. Ensure that the ambient temperature is within the recommended range of 5 °C to 35 °C. Verify that the power supply is correctly plugged into the shaver, ensuring it snaps in properly. If using the Clean & Charge Station, confirm that the shaver is placed correctly, with the contacts aligned.
K
Kelsey GuzmanAug 29, 2025
Why my Braun 9385cc does not charge completely and keeps blinking?
- J
  Justin BurtonAug 29, 2025
  If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature might be out of the valid range. The recommended ambient temperature for charging is 5 °C to 35 °C.
S
Samantha BarronSep 14, 2025
How to unlock Braun 9385cc?
- S
  Steven AlexanderSep 14, 2025
  If your Braun Electric Shaver does not start when pressing the on/off button, it may be because the shaver can only be operated cordless, so unplug it. Also, the travel lock might be activated. To unlock the shaver, press the on/off button for 3 seconds.
R
Ross ShepardSep 10, 2025
Why there is increased consumption of cleaning fluid in my Braun 9385cc?
- C
  Christian ReyesSep 10, 2025
  Increased consumption of cleaning fluid in your Braun Electric Shaver's Clean & Charge station may be due to a clogged drain. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
H
heatherlamSep 7, 2025
Why does my Braun Electric Shaver have an unpleasant smell?
- I
  igarciaSep 7, 2025
  An unpleasant smell from your Braun Electric Shaver head can occur if the shaver head is cleaned with water. When cleaning the shaver head with water only use hot water and from time to time some liquid soap (without abrasive substances). Remove Foil & Cutter cassette to let it dry. Also, if the cleaning cartridge is in use for more than 8 weeks, change the cleaning cartridge at least every 8 weeks.
R
Ralph JonesSep 4, 2025
What to do if cleaning does not start on my Braun 9385cc Clean & Charge Station?
- C
  charles74Sep 4, 2025
  If cleaning doesn't start when you press the start button on your Braun Electric Shaver's Clean & Charge Station, make sure the shaver is correctly placed and pushed to the rear of the station, ensuring the contacts align. If the cleaning cartridge doesn't contain enough cleaning fluid (indicated by a blinking red display), insert a new cartridge and press the start button again. Also, if the appliance is in stand-by mode, simply press the start button again.