Braun 9395cc - Clean & Charge Station Troubleshooting

37
Clean & Charge Station
Cleaning does
not start when
pressing the
start button.
1. Shaver is not placed
properly in the
Clean & Charge
Station.
2. Cleaning cartridge
does not contain
sufficient cleaning fluid
(display blinks red).
3. Appliance is in
stand-by mode.
1. Insert shaver into the Clean & Charge
Station and push it to the rear side of
the station (contacts of the shaver
need to align with contacts in the
station).
2. Insert new cleaning cartridge.
Press the start button again.
3. Press the start button again.
Increased
consumption of
cleaning fluid.
Drain of the Clean &
Charge station is
clogged.
– Clean the drain with a wooden
toothpick.
– Regularly wipe the tub clean.
91611495_93XX_wet&dry_JP.indd 3791611495_93XX_wet&dry_JP.indd 37 26.10.17 14:2226.10.17 14:22
Business Use - P&G AUTHORIZED 91754369 Rev 001 Effective Date 2017-11-02 Printed 2018-07-25 Page 37 of 40