Braun DigiFrame 7060 User Manual

ENGLISH8
1 Product Diagram
1.1 Remote Control
1. POWER_ Switch On/Off
2. SETUP _Enter copy & delete interface.
3. Rotate _In the pause status of single picture,
press ROTATE to revolve the picture 90° in
counterclockwise each time.
4. _ Functional selection button - top cursor.
5. Zoom_In the pause status of single picture,
magnify picture display size.
6. _ Functional selection button - left cursor
7. OK_ Press to confirm. Play/pause: In single pic-
ture mode, press it to start slideshow; In slides-
how mode, Press it to pause, then repress it to
play.
8. _ Functional selection button - right cursor
9. SLIDE SHOW_ Press to start slideshow directly
10. _ Functional selection button - bottom cursor.
11. EXIT _ Press to return to upper page, or enter
the main menu
1.2 Structure and Interfaces
1 USB port
2 SD/SDHC, MMC, MS, MS pro card slot
3 DC in: 5V/1A
4 Play / Pause
5 Forward, Next
6 Back, Previous
7 Exit
8 Menu, Menu 2-3 sec –> POWER on/off
9 Wall mount
10 Stand
2. Installing & Replacing the Battery
Place the upside of the remote control down, press
down on the ridged area of the battery cover and
pull towards you to remove the tray. Place one
CR2025 lithium button-cell battery on the tray with
the positive “+”side facing you. Reinsert the tray.
BA_DF-7030 Neu_GB.qxd 08.11.2011 15:47 Uhr Seite 2

Braun DigiFrame 7060 Specifications

General

Aspect ratio	4:3
LED backlight	Yes
Display diagonal	7 \
Display brightness	250 cd/m²
Display resolution	800 x 600 pixels
Contrast ratio (typical)	300:1
Image formats supported	JPG
Compatible memory cards	Memory Stick (MS), MMC, MS PRO, SD, SDHC
Interface	USB 2.0
Headphone connectivity	-
USB 2.0 ports quantity	1
Product color	Black
Placement supported	Horizontal/Vertical
Playback modes	Rotation, Slideshow, Zoom
AC input voltage	100-240 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	25 mm
Width	192 mm
Height	157 mm
Weight	345 g