ENGLISH 9
3. Getting Started
3.1 Extend the digital photo frame bracket on the
back of the frame to the widest position for grea-
test stability, and then plug one end of the included
AC adapter into a standard 110-240V AC electrical
outlet and the other end into the right side the
frame.
3.2. Remove the protective film covering the LCD.
3.3. Remove the plastic battery insulator from the
battery compartment and make sure the remote
control has a battery inside. Please refer to “Instal-
ling & Replacing Battery” if you need a new battery.
3.4. Power on the unit by pressing the Power but-
ton on the remote control or at the backside of the
unit (Press MENU button for a longer period).
4. Operating Instruction
After turning on the unit, it will show the startup
picture, press EXIT to get to the card select inter-
face.
4.1 Card and USB
It supports SD/SDHC/MMC/MS and USB 2.0. After
inserting a card or USB device, slideshow will play
automatically, then press EXIT twice to access to
photo, file, calendar and setup. Press OK to con-
firm.
Note:
Make sure there are supported picture files in the
Card or USB device.
4.2 Picture Mode
Press EXIT to choose "MEMORY CARD" in the main
menu. Highlight Photo, press OK to access to the
nine-picture mode, use to choose the pic-
ture, press OK to play the picture in single window.
Press OK to start slideshow pictures in the selected
slide mode.
BA_DF-7030 Neu_GB.qxd 08.11.2011 15:47 Uhr Seite 3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
