13
Hints and Tips
l
Use fresh ingredients
l
Do not cut food too small. Fill the width of the feed
tube fairly full.This prevents the food from slipping
sideways during processing.
l
When slicing or grating: food placed upright comes
out shorter than food placed horizontally.
l
There will always be a small amount of waste on
the disc or in the bowl after processing.
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16
17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
Mini chopper/mill (AS00004268)
a Jar
b Sealing ring
c Blade assembly
1
Put the ingredients into the jar.
2
Fit the sealing ring into the blade assembly.
3
Turn the blade assembly upside down. Lower it
into the jar, blades down.
4
Screw the blade assembly onto the jar until finger
tight. Refer to the graphics on the underside of the
blade assembly as follows:
- Unlocked position
- Locked position
5
Place the mill onto the power unit and turn
clockwise to lock in position.
6
Select Maximum speed or use the pulse (P).
Hints and Tips
l
Baby food/purée - allow cooked food to cool down
to room temperature before processing in the mill.
l
For best results the main bowl is recommended
when chopping herbs.
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17
18
19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
Storage Bag
Store your discs, dough tool and mill in the bag
supplied.
For safety reason the knife blade should be stored in
the main bowl instead of the storage bag when not in
use.
Care and Cleaning
l
Always switch off and unplug before cleaning.
l
Handle the mill blade assembly, knife blade and
discs with care - they are extremely sharp.
l
Some foods may discolour the plastic. This is
perfectly normal and will not harm the plastic
or affect the flavour of your food. Rub with a
cloth dipped in vegetable oil to remove the
discolouration.
Power Unit
l
Wipe with a damp cloth, then dry. Ensure
that the
interlock area is clear of food debris.
l
Do not immerse the power unit in water.
l
Store excess cord in the storage area at the back
of the power unit
bl
.
Any other servicing should be performed by an
authorized service representative.
Refer to illustration for cleaning
instruction of the tools and attachments
Service and Customer Care
l
If you experience any problems with the
operation of your appliance, before requesting
assistance refer to the ‘Troubleshooting
Guide’ section in the manual or visit
www.braunhousehold.com.
l
Warranty & Service - for detailed information
see separate warranty and service leaflet or visit
www.braunhousehold.com.
l
Made in China.
Voltage 120V
Hertz 60Hz
Claimed Wattage 550W
To Next Page
Loading...
Need help?
General