EasyManuals Logo
Home>Braun>Iron>IS7286BK

Braun IS7286BK User Manual

Braun IS7286BK
Go to English
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
17
Steam comes out
under the base unit.
The “max” pressure safety
system has opened.
Turn the appliance o immediately
and contact an authorised Braun
Customer Service.
There are some water
drops from the holes
in the bottom of the
soleplate.
Water has condensed
inside the tubes because
steam is being used for the
first time, or has not been
used for some time.
Press the steam button several
times away from the ironing
board. This will eliminate cold
water from the steam circuit.
Brown coloured
fluid leaks from the
soleplate.
Chemical water softeners or
additives have been poured
into the water tank.
Never pour products into the water
tank. Clean the soleplate with a
damp cloth and rinse the boiler.
The first time the
appliance is turned
on, you notice smoke
or smell.
Some parts have been
treated with sealer/
lubricant which evaporates
the first time the iron heats
up.
This is normal and will stop
when you have used the iron a
few times. If the smoke/smell is
still present after turning o the
appliance, contact an authorised
Braun Customer Service.
The appliance emits
an intermittent noise
associated with
vibrations.
Water is being pumped into
the boiler.
This is normal and no action is
needed.
The closure is dicult
to unscrew.
Lime scale has made the
closure dicult to open.
Turn the cap forcefully. To avoid
the problem, descale the system
frequently.
The boiler is still under
pressure.
Never open the closure if the
boiler is still under pressure or
hot. Wait at least 2.5 hours before
opening the closure.
After refilling the water
tank, the icon
does
not reset.
The water float does not
work appropriately.
Empty the water tank, rinse out
and refill.
The water tank is not posi-
tioned correctly.
Position the water tank correctly.
All LEDs are flashing. System error.
Unplug the appliance, plug it in
again and press On/Off button. If
this problem is still present, turn
the appliance off immediately,
unplug and contact an authorised
Braun Customer Service.
5712812451_IS72xx_INT.indd 175712812451_IS72xx_INT.indd 17 08.11.21 08:3008.11.21 08:30
18 / 138

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Braun IS7286BK and is the answer not in the manual?

Braun IS7286BK Specifications

General IconGeneral
BrandBraun
ModelIS7286BK
CategoryIron
LanguageEnglish

Related product manuals