Do you have a question about the Braun L917F and is the answer not in the manual?
Brand | Braun |
---|---|
Model | L917F |
Category | Lifting Systems |
Language | English |
Manual for Series 06 L915 Commercial Wheelchair Lifts.
Warning about reading the manual before installation or servicing.
Steps for installing and connecting the Circuit Sentry.
Details on installing and connecting the Circuit Sentry.
Details on modified platform side plates and mounting brackets.
General safety precautions for installation and service.
Warning about contacting Braun if instructions are unclear.
Read manual and decals before operation.
Remove obstructions before installation.
Install lift in folded position before removing straps.
Do not fold/unfold platform before securing base plate.
Check for obstructions before drilling/cutting.
Route cables clear of hazards.
Electrical connection safety warning.
Adjust platform angle and floor level before operating with passenger.
Meet positioning and clearance specifications.
Maintenance and repairs by authorized personnel only.
Perform maintenance as outlined in schedule.
Disconnect power before servicing the lift.
Never modify the lift.
Use only authorized replacement parts.
Never install non-factory fasteners.
Lower platform fully when replacing cylinder/seals.
Owner's manual must be in storage pouch.
Failure to follow precautions may result in injury.
Read manual, supplements, decals before installation.
Lifts must be installed by Braun authorized representatives.
Remove obstructions before installation.
Install lift and power platform before removing straps.
List of installation parts required for the lift.
Instructions for positioning the lift in the vehicle.
Continued instructions for lift positioning.
Warning about lift positioning and folding.
Warning about folding platform before securement.
Warning about checking for obstructions.
Instructions for securing the lift to the vehicle.
Instructions for mounting the base plate.
Information on underfloor reinforcement brackets.
Further details on reinforcement brackets.
Warning about checking for obstructions before drilling.
Instructions for using external tooth star washers.
Instructions for tightening base plate mounting bolts.
Instructions for installing power and ground cables.
Warning about checking for obstructions before drilling.
Continued instructions for power and ground cable installation.
Warning on power cable routing.
Steps for installing and connecting the Circuit Sentry.
Risk of electrical shock warning.
Risk of electrical fire warning.
Instructions for installing the control box and harness.
Instructions for mounting the control box.
Instructions for routing and securing the control box cable.
Steps for testing lift operation.
Alignment checks for lift positioning.
Instructions for adjusting platform angle.
Adjusting platform angle and floor level.
Instructions for applying decals.
Warning about replacing decals.
Warning about storing owner's manual.
Instructions for positioning the roll stop.
Warning about adjusting roll stop.
Warning about adjusting platform angle.
Instructions for adjusting floor level.
Adjusting quiet-ride rubber bumper brackets.
Roll stop contact and platform contact adjustments.
Warning about maintenance by authorized technician.
Overview of the lift's general operation.
Warning about maintenance procedures.
Warning about automatic stop failure.
Description of electrical system components.
Electrical shock warning for testing.
Warning about improper microswitch adjustment.
Description of the hydraulic system.
Warning about improper pressure switch adjustment.
Warning about adjusting pressure relief valve.
Warning before priming/flushing backup pump.
Warning about replacing cylinders or testing for leaks.
Warning about authorized service technicians.
Steps for pre-trip inspection of the lift.
Steps for post-trip inspection of the lift.
Checklist for lift positioning and clearance.
Checklist for installation details.
Details of the five-year limited warranty.