14
Long term storage ranges
Storage/transport temperature: –13 °F to 140 °F (–25 °C to 60 °C)
Humidity: 15–95% non condensing
Battery: (2) AA Batteries - at least 1000
measurements
Pressure: 700-1060hPA (0.7-1.06 atm)
This infrared thermometer meets requirements established in ASTM Standard E
1965-98 for the thermometer system. Full responsibility for the conformance of the
product to the standard is assumed by Kaz, USA, Inc., a Helen of Troy Company,
Marlborough, MA 01752, USA.
ASTM laboratory accuracy requirements for the thermometer only in the display
range of 96.8 °F to 102.2 °F (36 °C to 39 °C) for infrared thermometers is ± 0.4 °F
(± 0.2 °C), whereas for mercury-in-glass and electronic thermometers, the
requirement per ASTM Standards E 667-86 and E 1112-86 is ± 0.2 °F ( ± 0.1 °C).
This device conforms to the following standards:
IEC 60601-1:2006 Medical electrical equipment. General requirements for basic
safety and essential performance
ISO 80601-2-56 Particular requirements for basic safety and essential
performance of clinical thermometers for body temperature measurement
ASTM 1965E – ASTM Standard for Infrared Clinical Thermometers
EN 12470-5: 2003 «Clinical thermometers» – Part 3: Performance of compact
electrical thermometers (non-predictive and predictive) with maximum device.
IEC 60601-1-2: General requirements for basic safety and essential performance
–
Collateral Standard: Electromagnetic compatibility –
Requirement and tests
NOTE: Do not use this device in the presence of electromagnetic or other
interference outside the normal range specified in IEC 60601-1-2.
EN 980: 2008 Symbols for use in labeling of medical devices.
EN 1041: 2008 Information supplied by the manufacturer of medical devices.
EN 60601-1-11: 2010 Medical electrical equipment -- Part 1-11: General
requirements for basic safety and essential performance -- Collateral standard:
Requirements for medical electrical equipment and medical electrical systems
used in the home healthcare environment.
To Next Page
Loading...
