What to do if the Braun ThermoScan 3 Thermometer battery is low?
If your Braun Thermometer indicates a low battery, try removing the battery and reinserting it. Wait one minute, then turn the device on again. If the problem persists, replace the battery with a new one.
What to do if my Braun ThermoScan 3 shows a system error and an unusual temperature?
If your Braun Thermometer shows a temperature outside the normal human range and displays a system error, ensure the probe tip and lens are clean, and a new, clean, disposable lens filter is attached. Also, verify that the thermometer is inserted correctly. After checking these, take a new temperature reading and then reset the thermometer.
Why won't my Braun ThermoScan 3 turn on, indicating the battery is too low?
If your Braun Thermometer won't turn on due to a very low battery, insert a new battery.
What to do if Braun ThermoScan 3 reads too high or low?
If the Braun Thermometer displays a temperature outside the normal human range, ensure the probe tip and lens are clean and that a new, clean hygienic lens filter is attached. Also, confirm the thermometer is correctly inserted before taking a new temperature. If the issue continues, try resetting the thermometer.
How to fix a Braun ThermoScan 3 Thermometer with a low battery?
If your Braun Thermometer indicates a low battery, try removing the battery and replacing it. Wait one minute before turning the device on again. You may also need to insert a new battery.
What to do if my Braun Thermometer has no lens filter?
If no hygienic lens filter is attached to your Braun Thermometer, attach a new, clean one before use.
General| Measurement Method | Infrared |
|---|---|
| Measurement Time | Approximately 1 second |
| Battery Type | 2 x 1.5 V AA batteries |
| Hygiene | Disposable lens filters |
| Display | LCD |
| Auto Shut-off | Yes, after 60 seconds |
| Accuracy | ±0.2°C (±0.4°F) |
| Battery Life | Approximately 1000 measurements |
| Temperature Range | 34.0°C to 42.2°C (93.2°F to 108.0°F) |
| Memory | No |
Details the components and features of the Braun ThermoScan® 3 ear thermometer.
Outlines the intended purpose and scenarios for using the ear thermometer.
Provides essential safety information and potential risks related to thermometer use.
Explains beep indicators for normal, fever, and high fever temperature readings.
Discusses normal body temperature ranges and variations.
Step-by-step guide for accurate temperature measurement with the ear thermometer.
Instructions for using disposable lens filters to ensure hygiene and accurate readings.
Advice on factors affecting ear temperature and optimal measurement techniques.
Procedures for cleaning the thermometer's probe tip and exterior.
Guide to switching between Fahrenheit (°F) and Celsius (°C) temperature scales.
Instructions for safely and correctly replacing the battery in the thermometer.
Solutions for common error messages and operational problems with the thermometer.
Technical details, operating ranges, accuracy, and environmental requirements for the thermometer.
Information regarding the product's limited warranty coverage and terms.
Support contact details for questions, comments, or assistance with the thermometer.
To Next Page
