To Next PageTo Next PageWhy my Braun Pro Wet&Dry 9419s does not charge completely and keeps blinking?
If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature is likely outside the recommended range. The recommended ambient temperature for charging is 5 °C to 35 °C.
How to get rid of the unpleasant smell from my Braun Pro Wet&Dry 9419s Electric Shaver head?
An unpleasant smell from your Braun Electric Shaver head is likely due to cleaning it with water alone. When cleaning the shaver head with water, use hot water and, occasionally, a bit of liquid soap (without abrasive substances). Remember to remove the Foil & Cutter cassette and allow it to dry completely.
What to do if my Braun Pro Wet&Dry 9419s charging does not start?
If charging doesn't start when your Braun Electric Shaver is connected to a power socket or placed in the Clean & Charge Station, wait a few minutes, as charging may be delayed, especially after long storage. Charging should start automatically. Ensure that the ambient temperature is within the recommended range of 5 °C to 35 °C. Verify that the power supply is correctly plugged into the shaver, ensuring it snaps in properly. If using the Clean & Charge Station, confirm that the shaver is placed correctly, with the contacts aligned.
Why does my Braun Electric Shaver head smell bad?
An unpleasant smell from your Braun Electric Shaver head can be caused by cleaning the shaver head with water or using a cleaning cartridge for too long. When cleaning with water, use only hot water and occasionally a bit of liquid soap (without abrasive substances), and let the Foil & Cutter cassette dry completely. Replace the cleaning cartridge at least every 8 weeks.
Why is my Braun Electric Shaver head damp after cleaning?
If the shaver head of your Braun Electric Shaver is damp, it could be due to a clogged drain in the Clean&Charge Station or using the cleaning cartridge for an extended period. Clean the drain with a wooden toothpick. If the cleaning cartridge has been used for a while, the alcohol/isopropanol proportion has decreased while the oil proportion has increased. Remove residue with a cloth.
Why is my Braun Pro Wet&Dry 9419s Electric Shaver using so much cleaning fluid?
Increased consumption of cleaning fluid in your Braun Electric Shaver's Clean&Charge Station is likely due to a clogged drain. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
What to do if Braun Pro Wet&Dry 9419s does not charge completely and keeps blinking?
If your Braun Electric Shaver isn't fully charging and keeps blinking, it could be due to the ambient temperature being outside the recommended range. Ensure the temperature is between 5 °C and 35 °C for optimal charging.
Why is my Braun Pro Wet&Dry 9419s Electric Shaver head still damp after cleaning?
If your Braun Electric Shaver head is damp after cleaning, it might be because the drying time after automatic cleaning was too short or the drain of the Clean & Charge station is clogged. Wait until the drying process has been completed. If the drain is clogged, clean it with a wooden toothpick.
Why is my Braun Pro Wet&Dry 9419s Electric Shaver not charging when connected to the power socket?
If charging doesn't start when you connect your Braun Electric Shaver to a power socket, wait a few minutes to see if charging starts automatically, as it might be delayed after long storage. Ensure the ambient temperature is between 5 °C and 35 °C for optimal charging. Also, make sure the special cord set is properly plugged in and snaps into place.
Why does my Braun Electric Shaver not charge completely and keeps blinking?
If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature may be out of the recommended range. The ideal ambient temperature for charging is between 5 °C and 35 °C.
General| Brand | Braun |
|---|---|
| Model | Pro Wet&Dry 9419s |
| Category | Electric Shaver |
| Language | English |
