Page 35
Up (To Raise):
Manual Operating Instructions
Using hand pump handle:
a. Place slotted end of pump han-
dle onto back-up pump release
valve and turn clockwise to
close securely. See Photo D.
Note: Valve must be tight, but
do not overtighten.
b. Insert handle into back-up
pump and stroke until platform
reaches oor level (see
Photo E).
To Fold Platform (In):
Insert handle into back-up pump
and stroke until platform stops
(folds fully). See Photo E.
Note: Close back-up pump
release valve securely before
operating electric pump. Store
pump handle in clamps shown
in Photo B.
Refer to release valve photos and
illustration on page 33.
E
Open
(Down)
Close
(Up/Stop)
D
Stroking
Hand
Pump
To Next Page
Loading...
