Route
>Create
>Delete
Variometer Set
>Digital Vario Integrator
>Adjustment thermal exit
>Basic filter
Variometer-audio climb
>Climbing threshold
>Basic frequency
>Change frequency
>Pitch adjustment
>Pitch Mode (lin. / exp.)
Variometer-audio sink
>Sink-threshold
>Basic frequency
>Sink alarm
Speed
>Stall alarm
>Vane sensor corr.
>Polare
Pilot
>Name
>Glider type
>Glider ID
Instrument settings
>Display contrast
>Battery type
>Time area
>Units
Altimeter m / ft.
Speed kmh / mph / kts
Temperature °C / °F
Air pressure hPa / inHg
Vario m/s / ft.Min*100
Time 12h / 24h
Co-ordinates format GG¶PPPPG¶PP¶VVGGGGGGG870
Factory settings Only useable by code
>Pressure sensor corr
>Set to Original
>Brauniger intern
>Gerätenummer
>Clr. EEprom to non Adj.
>Kalibration
>Device type
With the arrow- key 2 and 5 you can toggle through the menu.
The selected field is blinking. Confirming with OK, you can enter the selecting area and by using the key 2 or
5 you may select your desired setting. Pressing OK memorise the setting. Pressing key 1 = escape you returns
to the main screen.
To Next Page
Loading...
