Engine, Briggs 550 series
Bolt, 5/16-18 x 1-3/4” long
Set Screw, 1/4-20 x 1/2”
long
Bolt, 5/16-24 x 3/4” long
Bolt, 5/16-24 x 3-1/2” long
Low-Pressure Hose, 5/8” x
7” long
Low-Pressure Hose, 5/8” x
15” long
Handle Assembly Kit
(includes handle, clevis pins,
and hairpin clips)
Note: When replacing #14 - Hydraulic Pump, #15 - 5/16-24 x 3-1/2 Bolts must be tightened to 13.5 ft. lbs.