Braven 405 - Turn On & Bluetooth Pairing; Powering On and Off; Bluetooth Pairing Process

5
ENG
ENGLISH
TURN ON & BLUETOOTH
®
PAIRING
1. Press the Power Button for 2-3 seconds
to turn on your BRAVEN (405). Press the
same button again for 2-3 seconds to
turn your BRAVEN off.
2. Activate Bluetooth
®
on the phone or
device you are pairing with (see your
device’s instruction manual for information
on activating its Bluetooth
®
settings).
3. Press and hold the Play / Pause Button
on your BRAVEN until you hear the
BRAVEN pairing sound. LEDs and backlit
buttons will ash during pairing process.
4. Go to your phone or device’s Bluetooth
®
settings and select “BRAVEN 405” from
the list.
5. If asked for a passcode enter “0000”
Your BRAVEN will remember the last 8
devices it has paired with.
NOTE: If your BRAVEN does not have
an active Bluetooth
®
connection and
is left on, it will shut itself off after 30
minutes. To restart your BRAVEN you
will need to press and hold the Power
Button for 2-3 seconds.