Model name:
Model
Content of Electronic Manual
Before Use ...................................... Precautions, disclaimer, etc.
Operating the Printer ..................... Procedures for printing cards
Replacement .......... Procedures for replacing consumable items
Maintenance ............................................... Cleaning procedures
Troubleshooting ................... Actions to take when troubles occur
Setup ................................... Installation, connection, setting, etc.
o
0
0
0
0
0
0
CD-ROM Content
Electronic Manual
Printer Driver
Status Monitor
Software Development Technical Information
o
•
•
•
•
Card Printer
Instruction Manual
LST1597-001A
Accessories
CD-ROM ................................................................................1
Instruction Manual ..................................................................1
READ ME FIRST :LST1004 ...................................................1
Power Cord (2 m) ...................................................................1
Cleaning Card ........................................................................1
Card Stacker ..........................................................................1
USB 2.0 Cable (2 m) ..............................................................1
Gloves ....................................................................................1
Tweezers ................................................................................1
o
0
0
0
0
0
0
0
0
0
Products Sold Separately
To purchase these items, consult our authorized dealers.
Use the retransfer film or ink ribbon within half a year after purchase.
Ink Ribbon (YMCK) 1000 frames/roll, Model: CY-340-100E
Ink Ribbon (YMCKK) 750 frames/roll, Model: CY-35K-75E
Ink Ribbon (YMCKP) 750 frames/roll, Model: CY-35P-75E
Ink Ribbon (YMCKU) 750 frames/roll, Model: CY-35U-75E
Retransfer Film 1000 frames/roll, Model: CY-3RA-100
Cleaning Kit, Model: CX210-CKIT1
Magnetic Head Cleaning Card (5 Pcs),
Cotton Swab (5 Large and 5 Small), Cleaning Wipes (1 Box)
Cleaning Card, Model: CX210-CC1
10 Pcs/Set
o
•
•
•
•
•
•
•
Thank you for purchasing this product.
Please read through the “Electronic Manual” in the CD-ROM carefully in advance to ensure proper use of this product.
Also, to make sure that the product is used safely, please read through the “Safety Precautions” in the “READ ME FIRST”
booklet. Please store the manuals properly after reading so that they can be referred to whenever necessary.
Place this “Instruction Manual” near the printer and use it as and when needed.
Specifications
Operating environment conditions
Temperature: 15 °C to 30 °C
(When peel-off ink, UV ink is used: 17 °C to 28 °C)
Humidity: 35 % to 70 % No condensation
(When peel-off ink, UV ink is used: 35 % to 60 %)
Storage environment conditions
<Printer unit>
Temperature : -15 °C to 55 °C
Humidity : 20 % to 80 %
<Printing media (retransfer film or ink ribbon) / card>
Temperature : 5 °C to 25 °C
Humidity : 40 % to 60 %
Power supply.................................
AC 100 V - 120 V, 50 Hz/60 Hz
AC 220 V - 240 V, 50 Hz/60 Hz
Power consumption ........................................................... 310 W
(maximum power when all options are installed)
Current consumption .................................. 3.5 A (100 V system)
1.6 A (200 V system)
Mass .................................................................... approx. 13.5 kg
(double-sided printer, excluding optional built-in items)
Dimensions ............... 343 mm x 335 mm x 322 mm (W x H x D)
o
0
0
0
0
0
0
0
* The specifications and appearance of this product may be modified
for improvement without prior notice.
CX-7600
Option
Bend Remedy unit Magnetic Encoder Contact IC Encoder Non-contact IC Encoder
Option Checklist
Use the checklist below to identify the options of the printer in use. Tick accordingly.
o
LST1597-001A
To Next Page
Loading...