Model
Specifications
Operating environment conditions ....Temperature: 15°C to 30°C
(When peel-off ink, UV ink is used: 17 °C to 28 °C)
Humidity: 35 % to 70 % No condensation
(When peel-off ink, UV ink is used: 35 % to 60 % )
Storage environment conditions
<Printer unit>
Temperature : -15 °C to 55 °C
Humidity : 20 % to 80 %
<Printing media (retransfer film or ink ribbon) / card>
Temperature : 5 °C to 25 °C
Humidity : 40 % to 60 %
Power supply..................................
AC 100 V - 120 V, 50 Hz/60 Hz
AC 220 V - 240 V, 50 Hz/60 Hz
Power consumption ........................................................... 310 W
(maximum power when all options are installed)
Current consumption ...................................3.5 A (100 V system)
1.6 A (200 V system)
Mass .................................................................... approx. 13.5 kg
(single-sided printer, including bend remedy unit)
Dimensions ............... 343 mm x 335 mm x 322 mm (W x H x D)
o
0
0
0
0
0
0
0
* The specifications and appearance of this product may be modified
for improvement without prior notice.
CD-ROM Content
Electronic Manual
Printer Driver
Status Monitor
Software Development Technical Information
o
•
•
•
•
Card Printer
Instruction Manual
LST0993-001F
Products Sold Separately
To purchase these items, consult our authorized dealers.
Use the retransfer film or ink ribbon within one year after purchase.
YMCK (1000 frames/roll) Set, Model: CY-P340A-DN
YMCKP (750 frames/roll) Set, Model: CY-P35PA-DN
Ink Ribbon (YMCKK) 750 frames/roll, Model: CY-35K-75D
Ink Ribbon (YMCKU) 750 frames/roll, Model: CY-35U-75D
Retransfer Film 1000 frames/roll, Model: CY-3RA-100
Cleaning Kit, Model: CX210-CKIT1
Magnetic Head Cleaning Card (5 Pcs),
Cotton Swab (5 Large and 5 Small),
Cleaning Wipes (1 Box)
Cleaning Card, Model: CX210-CC1
10 Pcs/Set
o
•
•
•
•
•
•
•
CX-D80
LST0993-001F
Content of Electronic Manual
Before Use ...................................... Precautions, disclaimer, etc.
Operating the Printer ......................Procedures for printing cards
Replacement ........... Procedures for replacing consumable items
Maintenance ................................................Cleaning procedures
Troubleshooting ................... Actions to take when troubles occur
Setup ................................... Installation, connection, setting, etc.
o
0
0
0
0
0
0
Accessories
CD-ROM ................................................................................1
Instruction Manual ..................................................................1
READ ME FIRST :LST1004 ...................................................1
Power Cord (2 m) ...................................................................2
Cleaning Card ........................................................................1
Card Stacker ..........................................................................1
USB 2.0 Cable (2 m) ..............................................................1
Gloves ....................................................................................1
Tweezers ................................................................................1
o
0
0
0
0
0
0
0
0
0
Thank you for purchasing this product.
Please read through the “Electronic Manual” in the CD-ROM carefully in advance to ensure proper use of this product.
Also, to make sure that the product is used safely, please read through the “Safety Precautions” in the “READ ME FIRST”
booklet. Please store the manuals properly after reading so that they can be referred to whenever necessary.
Place this “Instruction Manual” near the printer and use it as and when needed.
Click
To Next Page
Loading...