The safety feature disables BravoWalk when a series of five
beeps and stimulations occur, which will cause a flashing
orange light. Reset it by holding and pressing the black
button until the light will turn blue.
Hold until blue
light appears to
reset device
FINDING THE APPROPRIATE
SETTING FOR YOUR DOG
SAFETY SHUTDOWN AND RESET
As your dog goes on multiple walks and gets used to the
collar, they may become desensitized to the Low setting
and pull through it. At this point, it would be a good idea to
try the Mid setting again. Generally, a dog will settle into the
right setting within a few minutes and you will be able to
enjoy the rest of your walk!
9
Power/Mode Button
To Next Page
Loading...