The device is always on. It automatically transitions to
standby mode to preserve the battery when it is not
used. You just grab it and go.
When the dog pulls on the leash, the pressure of the
collar activates a beep, vibration, or TENS stimulation
The level of stimulation increases gradually as the dog
pulls. The vibration or stimulation stops when the dog
stops pulling.
As a safety feature, Bravowalk goes into safe mode (no
vibration or stimulation) after 5 consecutive
stimulations are sent. The light on BW will flash orange
indicating the need for a manual reset. Simply hold
down the button until the blue light is visible. Reset
collar to appropriate setting.
The BravoWalk is an automatic training collar that trains
dogs not to pull in just one walk using sound, vibration, and
TENS stimulation.
It provides a safe and enjoyable ‘on-leash’ experience for
you and your dog. It helps correct over-pulling and trains
your dog the appropriate leash behavior.
HOW BRAVOWALK WORKS
3
Indicator Light
Power/Mode Button
Charging Port
Contacts
To Next Page
Loading...