BRAYER BR2700 - Troubleshooting and Storage; Storage Guidelines; Common Malfunctions and Solutions

18
EN
• If the inner surface of the bread maker is dirty,
remove dirt and wipe the surface with a slightly damp
cloth, then wipe it dry.
• Do not immerse the bread maker body, the power
cord and the power plug into water or any other
liquids.
STORAGE
• Clean the bread maker before taking it away for
storage.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
DELIVERY SET
1. Bread maker — 1 pc.
2. Power cord — 1 pc.
3. Manual — 1 pc.
ECHNICAL SPECIFICATIONS
• Power supply 220-240 V, ~ 50-60 Hz
• Rated input power: 550 W
Before applying to the service center.
Malfunction Possible reason Troubleshooting method
The bread maker cannot be
switched on. The symbols
«HHH» appear on the
display.
The bread maker has not cooled down yet
after the previous baking.
Switch the bread maker o󰀨 and unplug it. Remove the
baking form and let the bread maker cool down to the
room temperature.
If the symbols «LLL» are
shown on the display when
you switch the bread maker
on.
The temperature inside the bread maker
is too low.
Switch the bread maker o󰀨 and unplug it. Open the
bread maker lid, remove the baking form and let the unit
heat up to the room temperature for 10 — 20 minutes.
If the symbols «Err» are
shown on the display when
you switch the bread maker
on.
The temperature sensor is malfunctioning. In this case contact the authorized service center.