Breas Vivo 45 User Manual

Start the Pressure Ramp
If the treatment has been configured to allow pressure ramp, it can be started or stop-
ped by the Ramp button. The Ramp buttons are only available after the treatment is
started
1 Open the second Setup page by
pressing the Setup button twice.
2 Select Start Ramp using the Up and Down arrow buttons and then Start the ramp
by pressing the Right Arrow button.
3 Confirm to start the ramp.
4 Read and acknowledge the
information message regarding
reduced alarm functionality during
the ramp period.
46 How to Use the Vivo 45
Vivo 45 User manual
Doc. 006149 D-3

Breas Vivo 45 Specifications

General

Device Type	Ventilator
Operating Modes	CPAP
Target patient	Adults and pediatric patients
Humidifier	Optional
Power Supply	100-240 VAC, 50/60 Hz
Compliance	ISO 80601-2-12
Tidal Volume Range	50 - 2500 ml