5.2.9.4 Device Settings
General settings for the Vivo 45:
• Display Light: On (will keep the display lit up regardless of use), Auto (will adjust the
light intensity depending on the ambient light), Delayed (the display is dimmed after
30 seconds or more depending on the mode and battery setup. If any button is
pressed or any alarm occurs, the display light will return to normal again).
• Light Intensity (setting range: 1-9, where 1 is the lowest and 9 is the highest light
intensity setting. In cases where Display Light is set to “Auto”, the Light Intensity
setting will not be available).
If the light intensity is set too low, ambient light could cause difficulties in reading
the alarm text.
• Auto Keypad Lock (On, Off).
• Home Language: Selects the language for Home Mode.
5.2.9.5 Time and Date
• Time (set time: hours and minutes).
• Time Format (choose between 24 h or 12 h am/pm format).
• Date Format (choose between yyyy-mm-dd, dd/mm/yyyy, mm/dd/yyyy format).
• Date (set date: year, month and day).
5.2.9.6 Device Information
• Device Operating Time (hours)
• Firmware Version
• Language: Clinical Mode
• Language: Home Mode
• ~ AC (On/Off)
• External DC (V)
• Battery Health (%)
• Serial Number
5.3 Monitored Values in the Vivo 45
Values monitored by the Vivo 45 stored in the data log and displayed on the screen:
1. The monitoring screen:
How to Use the Vivo 45 57
Doc. 006149 D-3
Vivo 45 User manual
To Next Page
Loading...
Need help?
General
