To Next Page
J
jonesscottNov 3, 2025
Why does my Breckwell Stove shut off and the #2 light flash?
- KKenneth PhillipsNov 3, 2025
The Breckwell Stove might shut off and display a flashing #2 light due to several reasons: * A blocked airflow switch hose or stove attachment pipes. Clear the hose by disconnecting it and blowing through it. If blocked, use a wire coat hanger to remove the obstruction. * Blockage in the air inlet, burnpot, combustion air chambers, combustion blower, or exhaust pipe. Follow the cleaning steps in the maintenance section of the owner’s manual. * An improperly sealed firebox. Ensure the door is closed tightly and the gasket is in good condition. Also, check the ash door latch and slider plate (if applicable). * Incorrectly installed vent pipe. Verify that the vent pipe installation meets the guidelines in the owner’s manual. * Faulty airflow switch wire connections. Inspect the con...
General
