Breezaire WKSL SERIES User Manual

8610 Production Avenue  San Diego, California 92121  (858) 566-7465  Fax (858) 566-1943
WKSL SERIES
(USA only)
--INSTALLATION INSTRUCTIONS--
Thank you for choosing a BREEZAIRE cooling unit. We believe our products
are the best on the market and will provide many years of trouble free service.
Please take a few minutes and read this entire instruction before beginning the
installation.
MODEL
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_ SERIAL NUMBER__
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
INSTALLED BY
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_ DATE
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
While great effort has been made to provide accurate guidelines, BREEZAIRE cannot warrant
its units to properly cool a particular enclosure. Customers are cautioned that enclosure
construction, unit location and many other factors can affect the operation and performance of the
unit. Therefore the suitability of the unit for a specific enclosure or application must be determined
by the customer and cannot be warranted by BREEZAIRE.
Before removing the cooling unit from the box, please inspect for damage which might
have been incurred during shipping. If damage is found, notify the Freight Company
immediately.
BREEZAIRE is not responsible for any damages incurred during shipping.

Breezaire WKSL SERIES Specifications

General

Brand	Breezaire
Model	WKSL SERIES
Category	Air Conditioner
Language	English

Summary

WKSL Series Installation Overview

Introduction and Pre-Installation Checks

Welcome, product benefits, and initial inspection advice for the WKSL cooling units.

Enclosure Requirements

Construction Guidelines

Minimum specifications for enclosure construction, including insulation and vapor barriers for optimal cooling.

Sizing and Installation Steps

Sizing Guide and Specifications

Guide for selecting the appropriate WKSL unit based on enclosure volume and unit specifications.

Unit Mounting Procedures

Detailed instructions for mounting the fan/coil unit and the condensing unit.

System Plumbing and Wiring

System Operation

Charging and Initial Start-up

Procedures for charging the system with refrigerant and initial system operation.

Thermostat and Cooling Control

Details on using the Sentry III thermostat for temperature adjustment and operation.

Maintenance and Troubleshooting

Routine Maintenance

Recommended maintenance schedule and procedures for optimal unit performance.

Enclosure Problem Diagnosis

Common enclosure issues affecting performance and how to identify them.

Product Warranty Information