Breeze FPV Controller - Powering On;Off and Connection; Connection Preparation

2. POWERING ON/OFF & CONNECTION PREPARATION
1. Power on: Press Power button for 2 seconds to start the Game Controller.
2. Power off: Press Power button for 5 seconds to power off the Game Controller.
3. Connection Preparation
Connection Preparation for iOS platform:
Step 1) Press Y and then Power button for 2 seconds to start the Game Controller.
Step 2) The [ ] indicator light flashes.
Connection Preparation for Android Platform:
Step 1) Press the A button and then Power button for 2 seconds to start the controller.
Step 2) The [ ] indicator light flashes.
NOTICE: When the [ ] or the [ ] indicator light flashes, the Game Controller enters the “Connection” mode, and the
Game Controller is ready to be paired with your smart device via Bluetooth.
When the [ ] or the [ ] indicator light flashes, the Game Controller enters the “Connection” mode, and the
When the [ ] or the [ ] indicator light flashes, the Game Controller enters the “Connection” mode, and the
Step 2) The [ ] indicator light flashes.
When the [ ] or the [ ] indicator light flashes, the Game Controller enters the “Connection” mode, and the
Step 2) The [ ] indicator light flashes.
Step 2) The [ ] indicator light flashes.
Battery Warnings:
To charge the LiPo battery, you must only use the included charger.
Do not over-discharge the LiPo battery.
If at any time the LiPo battery begins to balloon or swell, discontinue charging or discharging immediately.
Always terminate all processes if the battery/charger malfunctions.
Store the LiPo battery at room temperature and in a dry area for best results.
Allow the LiPo battery to cool to ambient/room temperature before recharging.
Never charge the LiPo battery unattended at any time.
EN