4
•
•
Alarm ON/OFF
Pulling the alarm button out activates the alarm (ON), pressing it back in de-activates it
(OFF). Pushing the button also stops the alarm when sounding.
* When the alarm is set, it goes off twice a day (a.m. and p.m.) for 20 seconds
each time.
Resetting the alarm time
Rotate the crown 훿 anticlockwise to advance the hands and clockwise to move them
backwards. Turning the crown rapidly also increases the speed of the adjustment. To
stop the fast resetting motion, turn the crown slowly. By turning the crown slowly, the
adjustment is carried out in steps of one minute.
Switching from alarm time to normal time
When the crown 훿 is moved to its normal position, the minute hand moves rapidly
anticlockwise and stops to indicate the minutes of the current hour. A confirmation
"bip" is heard.
SWITCHING TO CHRONOGRAPH MODED
•
•
If button is pressed while the watch is in normal time mode, a confirmation "bip" is
heard. The second hand moves rapidly to 0 and the watch is in chronograph mode.
If button is pressed while the watch is in chronograph mode, a confirmation "bip" is
heard. The watch has returned to normal time mode.
To Next Page
Loading...
