BREN 700-Series User Manual
Installation 2 -16
2.8. Installing the driver for USB connection.
1. Insert the BREN INSTALLATION CD that was included with your BREN 700-Series
cutter and select ‘BREN Razor 700-Series Installation' when the disc starts.
2. On the following screen, you will have the option to install the 32 or 64-bit version
of the Windows driver for your BREN Razor. If y
ou do not know which version you
are currently running, see section 3b on the next page. NOTE: Windows will
generally not allow you to install the version that isn't compatible with your
system.
Once you've verified which version you're running, select the appropriate option or you can
select "Download Drivers Online' to get the most up-to-date version of the driver.
To Next Page
Loading...
General