BREN Razor 700 Series User Manual

BREN 700-Series User Manual
Basic Maintenance 5-1
Chapter 5 Basic Maintenance
This chapter explains the basic maintenance (i.e. cleaning the cutting plotter) required for the
cutting plotter. Except for the procedures mentioned below, all other maintenance must be
performed by a qualified service technician.
5.1 Cleaning the Cutting Plotter
Cleaning the machine properly and regularly will ensure optimal performance out of your
machine.
Cleaning Precaution !
Recommended Methods:
 Gently wipe the cutting plotter surface with a lint-free cloth. If necessary, with a damp cloth
immersed in water or alcohol. Dry and wipe any remaining residue off a soft, lint-free cloth.
 Wipe all dust and dirt from the tool carriage rails.
 Use a vacuum cleaner to empty any accumulated dirt and media residue beneath the pinch
roller housing.
 Clean the platen, paper sensors and pinch rollers with a damp cloth immersed in water or
alcohol and dry with a soft, lint-free cloth.
 Wipe dust and dirt from the stand.

Unplug the cutting plotter before cleaning it
in order to prevent electrical shock.

Never use solvents, abrasive cleaners or
strong detergents for cleaning. They may
damage the surface of the cutting plotter
and the moving parts.

BREN Razor 700 Series Specifications

General

Brand	BREN
Model	Razor 700 Series
Category	Cutter
Language	English