8110 Automatic Coffee Machine
Instruction Manual
Page 13 of 18
III. MODE SELECTION
The machine has two different setting: default setting, ECO mode and speed mode. In ECO mode,
the appliance helps to save more energy. In speed mode, the user can make their coffee faster than
in default setting.
Speed Mode Default Setting ECO Mode
Light on Yes Yes No
Pre-brewing
*
No Yes Yes
Auto shut off time 30mins 20mins 10mins
Cup Volume memory Yes Yes Yes
*Note: The pre-brewing function moistens the grounded beans in the brewer with a small amount of
water before full extraction. This expands the coffee grounds to build up a greater pressure in the
brewer which help extraction of all the oils and full flavor from the grounded beans.
1. When the machine is in standby, press and hold
for 5 seconds.
2. The indicator
will flash and the following will be displayed
in different settings:
3. Press the hot water button for ECO mode, strong coffee button for speed mode and mild coffee
button for default setting. Two beep sound will be heard indicates that the mode is being
selected. (Note: If you are pressing the relative lighted on button for each mode, the machine
will not respond).
4. If you want the setting to remain unchanged, press
again or wait 5 seconds for the machine
to return to standby.
E. CLEANING & MAINTENANCE
I. DESCALING
When flashes, it means that the appliance requires descaling. The appliance will remain in
the best condition if this function is performed at least once a month or more regularly depending
on the hardness of water used. It is also suggested that to
1. Fully fill the water tank.
2. Add one pack of cleaning agent included in the box to the water tank.
IMPORTANT: Do not use vinegar or other cleaning agent to do descaling of this appliance. The
cleaning agent might damage the appliance.
3. Plug in the appliance.
To Next Page
Loading...